Complete two-door cleanroom interlock system kit

クリーンルームのドア、窓およびインターロックシステム

2 ドアのクリーンルームのインターロックシステム

A complete interlock package for a two-door personnel or material airlock, allowing only the permitted door to release while the opposite opening remains secured.

Dedicated Two-Door Logic
Two Lock and Contact Channels
Request/Wait Indication
Emergency Release Input

見積もりリクエスト製品案内

商品紹介

The two-door system packages a compact controller with two door-position sensors, two electric-lock interfaces and paired request/status stations. In normal operation, opening one door inhibits release of the opposite door until the first door closes and any selected purge delay expires. The limited door count makes commissioning straightforward and suits common entry vestibules, gowning airlocks and pass-through rooms where the interlock relationship is one-to-one.

主要な特徴

Two dedicated channels provide direct door-to-door inhibition without unnecessary network complexity.

Request and wait indicators show occupants when the opposite door is in use.

A resettable delay can hold both doors closed while filtered air restores the vestibule condition.

Emergency release and optional fire-alarm input override normal sequencing according to the selected safety design.

お客様の製品に関する懸念事項

A simple two-door airlock still requires reliable state feedback, clear occupant indication and a defined response to emergency release or power loss.

Both vestibule doors are opened together during busy shift changes.The active door channel inhibits the opposite lock release until closed feedback is restored.

Users repeatedly pull a locked door because they cannot see the airlock status.Paired request stations provide distinct available and wait indications at each entrance.

The second door opens before the airlock has recovered after the first cycle.An adjustable inter-door delay holds release until the selected purge interval has elapsed.

典型的な用途

Two-door personnel airlocksGowning-room vestibulesMaterial transfer roomsClean laboratory entrance lobbies

技術的なパラメータ

Typical physical and electrical ranges for a two-door cleanroom interlock kit are listed below.

コア材料	Two-channel controller, regulated power supply, relays, door contacts and request/indicator stations
パネルの厚さ	80–130 mm controller enclosure depth; 10–25 mm operator-station depth
有効幅	200–280 mm controller enclosure width
最大長さ	320 mm controller enclosure height
鋼鉄の厚さを直面する	1.0–1.5 mm steel enclosure; stainless operator plates typically 1.2–2.0 mm
コア密度	Approximately 1800–1920 kg/m³ for the two-channel glass-reinforced PCB laminate
熱伝導率	Approximately 0.4–0.7 W/(m·K) for the controller PCB laminate
表面仕上げ	Powder-coated controller cabinet with brushed stainless or flush polymer request stations
ジョイントタイプ	Two independent door-contact and lock channels with hardwired request, alarm and emergency-release inputs
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Touch, touchless or mechanical request stationsMagnetic locks or electric strikesPurge timer and door-held alarmNormally locked or normally unlocked sequence

Planning a Two-Door Cleanroom Interlock System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する