Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Sistema de bloqueo de sala limpia de dos puertas
A complete interlock package for a two-door personnel or material airlock, allowing only the permitted door to release while the opposite opening remains secured.
- Dedicated Two-Door Logic
- Two Lock and Contact Channels
- Request/Wait Indication
- Emergency Release Input
Introducción del producto
The two-door system packages a compact controller with two door-position sensors, two electric-lock interfaces and paired request/status stations. In normal operation, opening one door inhibits release of the opposite door until the first door closes and any selected purge delay expires. The limited door count makes commissioning straightforward and suits common entry vestibules, gowning airlocks and pass-through rooms where the interlock relationship is one-to-one.
Características clave
Request and wait indicators show occupants when the opposite door is in use.
A resettable delay can hold both doors closed while filtered air restores the vestibule condition.
Emergency release and optional fire-alarm input override normal sequencing according to the selected safety design.
Preocupaciones del producto del cliente
A simple two-door airlock still requires reliable state feedback, clear occupant indication and a defined response to emergency release or power loss.
Both vestibule doors are opened together during busy shift changes.The active door channel inhibits the opposite lock release until closed feedback is restored.
Users repeatedly pull a locked door because they cannot see the airlock status.Paired request stations provide distinct available and wait indications at each entrance.
The second door opens before the airlock has recovered after the first cycle.An adjustable inter-door delay holds release until the selected purge interval has elapsed.
Aplicaciones típicas
Two-door personnel airlocksGowning-room vestibulesMaterial transfer roomsClean laboratory entrance lobbies
Parámetros técnicos
Typical physical and electrical ranges for a two-door cleanroom interlock kit are listed below.
| Materiales Core | Two-channel controller, regulated power supply, relays, door contacts and request/indicator stations |
|---|---|
| Panel de espesor | 80–130 mm controller enclosure depth; 10–25 mm operator-station depth |
| Ancho efectivo | 200–280 mm controller enclosure width |
| Longitud máxima | 320 mm controller enclosure height |
| Acero frente a espesor | 1.0–1.5 mm steel enclosure; stainless operator plates typically 1.2–2.0 mm |
| Densidad Core | Approximately 1800–1920 kg/m³ for the two-channel glass-reinforced PCB laminate |
| Conductividad térmica | Approximately 0.4–0.7 W/(m·K) for the controller PCB laminate |
| Superficie acabada | Powder-coated controller cabinet with brushed stainless or flush polymer request stations |
| Tipo conjunto | Two independent door-contact and lock channels with hardwired request, alarm and emergency-release inputs |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Touch, touchless or mechanical request stationsMagnetic locks or electric strikesPurge timer and door-held alarmNormally locked or normally unlocked sequence
Planning a Two-Door Cleanroom Interlock System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
