Complete two-door cleanroom interlock system kit

Двери в чистых помещениях, окна и системы блокировки

Двухдверная система блокировки для чистых помещений

A complete interlock package for a two-door personnel or material airlock, allowing only the permitted door to release while the opposite opening remains secured.

Dedicated Two-Door Logic
Two Lock and Contact Channels
Request/Wait Indication
Emergency Release Input

Запрос котировки Просмотреть продукты

Введение продукции

The two-door system packages a compact controller with two door-position sensors, two electric-lock interfaces and paired request/status stations. In normal operation, opening one door inhibits release of the opposite door until the first door closes and any selected purge delay expires. The limited door count makes commissioning straightforward and suits common entry vestibules, gowning airlocks and pass-through rooms where the interlock relationship is one-to-one.

Основные характеристики

Two dedicated channels provide direct door-to-door inhibition without unnecessary network complexity.

Request and wait indicators show occupants when the opposite door is in use.

A resettable delay can hold both doors closed while filtered air restores the vestibule condition.

Emergency release and optional fire-alarm input override normal sequencing according to the selected safety design.

Обеспокоенность клиентов продуктами

A simple two-door airlock still requires reliable state feedback, clear occupant indication and a defined response to emergency release or power loss.

Both vestibule doors are opened together during busy shift changes.The active door channel inhibits the opposite lock release until closed feedback is restored.

Users repeatedly pull a locked door because they cannot see the airlock status.Paired request stations provide distinct available and wait indications at each entrance.

The second door opens before the airlock has recovered after the first cycle.An adjustable inter-door delay holds release until the selected purge interval has elapsed.

Типичные приложения

Two-door personnel airlocksGowning-room vestibulesMaterial transfer roomsClean laboratory entrance lobbies

Технические параметры

Typical physical and electrical ranges for a two-door cleanroom interlock kit are listed below.

Основной материал	Two-channel controller, regulated power supply, relays, door contacts and request/indicator stations
Толщина панели	80–130 mm controller enclosure depth; 10–25 mm operator-station depth
эффективная ширина	200–280 mm controller enclosure width
Максимальная длина	320 mm controller enclosure height
Толщина линий стали	1.0–1.5 mm steel enclosure; stainless operator plates typically 1.2–2.0 mm
Плотность ядра	Approximately 1800–1920 kg/m³ for the two-channel glass-reinforced PCB laminate
Теплопроводимость	Approximately 0.4–0.7 W/(m·K) for the controller PCB laminate
Поверхностная отделка	Powder-coated controller cabinet with brushed stainless or flush polymer request stations
Объединенный тип	Two independent door-contact and lock channels with hardwired request, alarm and emergency-release inputs
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Touch, touchless or mechanical request stationsMagnetic locks or electric strikesPurge timer and door-held alarmNormally locked or normally unlocked sequence

Planning a Two-Door Cleanroom Interlock System specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой