Temperature validation logger in three-quarter view with rigid probe

أدوات اختبار الغرفة النظيفة والتحقق من صحتها

درجة الحرارة التحقق من صحة السجل

A sealed stainless wireless logger with an interchangeable precision probe for thermal validation in sterilizers, chambers and process equipment.

Sealed process-ready stainless body.
Cable-free validation logging.
Interchangeable precision probes.

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The compact cylindrical logger encloses its electronics and nonvolatile memory in a pressure-resistant 316L stainless body. A rigid low-mass temperature probe records process conditions without external cables, while a reader station programs the sampling sequence and retrieves stored measurements after the run. Interchangeable probe configurations adapt the same platform to chamber, load and penetration studies.

الخصائص الرئيسية

Sealed stainless construction suits steam, water and thermal processes.

Internal memory preserves measurements through the complete validation cycle.

Rigid low-mass probe responds quickly at the selected measurement point.

Interchangeable sensor geometry supports different process loads.

Wireless readout avoids cable feed-throughs in closed equipment.

Multi-position reader dock accelerates setup and data collection.

مخاوف المنتج للعملاء

Thermal validation inside sealed process equipment requires accurate time-temperature records from the load itself without compromising the chamber boundary or losing data under harsh conditions.

External thermocouple cables can interfere with a closed process chamber.The self-contained logger records internally without a cable feed-through.

A bulky sensor can influence the temperature of a small load.The slim stainless probe minimizes thermal mass at the measurement point.

Data must survive pressure, moisture and temperature exposure.Sealed electronics and nonvolatile memory protect the recorded cycle data.

Different loads require different probe reach and geometry.Interchangeable rigid and flexible sensor options adapt the logger to each study.

تطبيقات نموذجية

Steam sterilizer validationDepyrogenation and dry-heat studiesWasher-disinfector mappingCold chamber qualificationProcess vessel temperature profiling

المعلمات الفنية

Representative wireless validation-logger construction is listed below; probe length, sensor geometry and thermal protection can be configured for the process range.

المواد الأساسية	316L stainless logger body, precision temperature sensor, sealed electronics and nonvolatile memory
سمك اللوحة	Typically 1.0-2.0 mm for cylindrical pressure-resistant housing wall
العرض الفعال	Approximately 20-40 mm logger-body diameter
الحد الأقصى الطول	Approximately 120-300 mm including rigid temperature probe
الصلب يواجه سمك	Typically 0.5-1.0 mm for stainless probe sheath
الكثافة الأساسية	Approximately 7950-8000 kg/m³ for 316L stainless steel
الموصلية الحرارية	Approximately 14-16 W/(m·K) for 316L stainless steel
إنهاء السطح	Electropolished or satin 316L stainless body with dark sealing ring and identification band
نوع المشترك	Threaded interchangeable sensor coupling with sealed reader-interface base
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Rigid straight probesFlexible sensor leadFast-response needle probeThermal barrierMulti-position reader stationReal-time wireless module

Planning a Temperature Validation Logger specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا