Temperature validation logger in three-quarter view with rigid probe

클린룸 테스트 및 검증 장비

온도 검증 로거

A sealed stainless wireless logger with an interchangeable precision probe for thermal validation in sterilizers, chambers and process equipment.

Sealed process-ready stainless body.
Cable-free validation logging.
Interchangeable precision probes.

견적 요청 제품 찾아보기

상품 소개

The compact cylindrical logger encloses its electronics and nonvolatile memory in a pressure-resistant 316L stainless body. A rigid low-mass temperature probe records process conditions without external cables, while a reader station programs the sampling sequence and retrieves stored measurements after the run. Interchangeable probe configurations adapt the same platform to chamber, load and penetration studies.

주요 기능

Sealed stainless construction suits steam, water and thermal processes.

Internal memory preserves measurements through the complete validation cycle.

Rigid low-mass probe responds quickly at the selected measurement point.

Interchangeable sensor geometry supports different process loads.

Wireless readout avoids cable feed-throughs in closed equipment.

Multi-position reader dock accelerates setup and data collection.

고객 제품 관심사

Thermal validation inside sealed process equipment requires accurate time-temperature records from the load itself without compromising the chamber boundary or losing data under harsh conditions.

External thermocouple cables can interfere with a closed process chamber.The self-contained logger records internally without a cable feed-through.

A bulky sensor can influence the temperature of a small load.The slim stainless probe minimizes thermal mass at the measurement point.

Data must survive pressure, moisture and temperature exposure.Sealed electronics and nonvolatile memory protect the recorded cycle data.

Different loads require different probe reach and geometry.Interchangeable rigid and flexible sensor options adapt the logger to each study.

일반적인 응용 프로그램

Steam sterilizer validationDepyrogenation and dry-heat studiesWasher-disinfector mappingCold chamber qualificationProcess vessel temperature profiling

기술 매개변수

Representative wireless validation-logger construction is listed below; probe length, sensor geometry and thermal protection can be configured for the process range.

핵심 재료	316L stainless logger body, precision temperature sensor, sealed electronics and nonvolatile memory
패널 두께	Typically 1.0-2.0 mm for cylindrical pressure-resistant housing wall
유효 폭	Approximately 20-40 mm logger-body diameter
최대 길이	Approximately 120-300 mm including rigid temperature probe
강철 면면 두께	Typically 0.5-1.0 mm for stainless probe sheath
코어 밀도	Approximately 7950-8000 kg/m³ for 316L stainless steel
열전도도 (Thermal Conductivity)	316 L 스테인레스 스틸의 약 14 - 16 W / (m · K)
표면 마무리	Electropolished or satin 316L stainless body with dark sealing ring and identification band
접합 유형	Threaded interchangeable sensor coupling with sealed reader-interface base
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Rigid straight probesFlexible sensor leadFast-response needle probeThermal barrierMulti-position reader stationReal-time wireless module

Planning a Temperature Validation Logger specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.