Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Logger de validación de temperatura
A sealed stainless wireless logger with an interchangeable precision probe for thermal validation in sterilizers, chambers and process equipment.
- Sealed process-ready stainless body.
- Cable-free validation logging.
- Interchangeable precision probes.
Introducción del producto
The compact cylindrical logger encloses its electronics and nonvolatile memory in a pressure-resistant 316L stainless body. A rigid low-mass temperature probe records process conditions without external cables, while a reader station programs the sampling sequence and retrieves stored measurements after the run. Interchangeable probe configurations adapt the same platform to chamber, load and penetration studies.
Características clave
Internal memory preserves measurements through the complete validation cycle.
Rigid low-mass probe responds quickly at the selected measurement point.
Interchangeable sensor geometry supports different process loads.
Wireless readout avoids cable feed-throughs in closed equipment.
Multi-position reader dock accelerates setup and data collection.
Preocupaciones del producto del cliente
Thermal validation inside sealed process equipment requires accurate time-temperature records from the load itself without compromising the chamber boundary or losing data under harsh conditions.
External thermocouple cables can interfere with a closed process chamber.The self-contained logger records internally without a cable feed-through.
A bulky sensor can influence the temperature of a small load.The slim stainless probe minimizes thermal mass at the measurement point.
Data must survive pressure, moisture and temperature exposure.Sealed electronics and nonvolatile memory protect the recorded cycle data.
Different loads require different probe reach and geometry.Interchangeable rigid and flexible sensor options adapt the logger to each study.
Aplicaciones típicas
Steam sterilizer validationDepyrogenation and dry-heat studiesWasher-disinfector mappingCold chamber qualificationProcess vessel temperature profiling
Parámetros técnicos
Representative wireless validation-logger construction is listed below; probe length, sensor geometry and thermal protection can be configured for the process range.
| Materiales Core | 316L stainless logger body, precision temperature sensor, sealed electronics and nonvolatile memory |
|---|---|
| Panel de espesor | Typically 1.0-2.0 mm for cylindrical pressure-resistant housing wall |
| Ancho efectivo | Approximately 20-40 mm logger-body diameter |
| Longitud máxima | Approximately 120-300 mm including rigid temperature probe |
| Acero frente a espesor | Typically 0.5-1.0 mm for stainless probe sheath |
| Densidad Core | Approximately 7950-8000 kg/m³ for 316L stainless steel |
| Conductividad térmica | Approximately 14-16 W/(m·K) for 316L stainless steel |
| Superficie acabada | Electropolished or satin 316L stainless body with dark sealing ring and identification band |
| Tipo conjunto | Threaded interchangeable sensor coupling with sealed reader-interface base |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Rigid straight probesFlexible sensor leadFast-response needle probeThermal barrierMulti-position reader stationReal-time wireless module
Planning a Temperature Validation Logger specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
