Temperature validation logger in three-quarter view with rigid probe

Instruments d'essai et de validation de salle blanche

Validation de température Logger

A sealed stainless wireless logger with an interchangeable precision probe for thermal validation in sterilizers, chambers and process equipment.

Sealed process-ready stainless body.
Cable-free validation logging.
Interchangeable precision probes.

Demander un devis. Browse les produits

Introduction de produit

The compact cylindrical logger encloses its electronics and nonvolatile memory in a pressure-resistant 316L stainless body. A rigid low-mass temperature probe records process conditions without external cables, while a reader station programs the sampling sequence and retrieves stored measurements after the run. Interchangeable probe configurations adapt the same platform to chamber, load and penetration studies.

Key Features

Sealed stainless construction suits steam, water and thermal processes.

Internal memory preserves measurements through the complete validation cycle.

Rigid low-mass probe responds quickly at the selected measurement point.

Interchangeable sensor geometry supports different process loads.

Wireless readout avoids cable feed-throughs in closed equipment.

Multi-position reader dock accelerates setup and data collection.

Préoccupations du client produit

Thermal validation inside sealed process equipment requires accurate time-temperature records from the load itself without compromising the chamber boundary or losing data under harsh conditions.

External thermocouple cables can interfere with a closed process chamber.The self-contained logger records internally without a cable feed-through.

A bulky sensor can influence the temperature of a small load.The slim stainless probe minimizes thermal mass at the measurement point.

Data must survive pressure, moisture and temperature exposure.Sealed electronics and nonvolatile memory protect the recorded cycle data.

Different loads require different probe reach and geometry.Interchangeable rigid and flexible sensor options adapt the logger to each study.

Les applications typiques

Steam sterilizer validationDepyrogenation and dry-heat studiesWasher-disinfector mappingCold chamber qualificationProcess vessel temperature profiling

Paramètres techniques

Representative wireless validation-logger construction is listed below; probe length, sensor geometry and thermal protection can be configured for the process range.

Matériaux de base	316L stainless logger body, precision temperature sensor, sealed electronics and nonvolatile memory
Panneau épaisseur	Typically 1.0-2.0 mm for cylindrical pressure-resistant housing wall
Largeur effective	Approximately 20-40 mm logger-body diameter
Longueur maximale	Approximately 120-300 mm including rigid temperature probe
Acier face épaisseur	Typically 0.5-1.0 mm for stainless probe sheath
Densité Core	Environ 7950 - 8000 kg / m3 pour l'acier inoxydable 316L par
Conductivité thermique	Environ 14 - 16 W / (m · K) pour l'acier inoxydable 316L
surface finie	Electropolished or satin 316L stainless body with dark sealing ring and identification band
Type joint	Threaded interchangeable sensor coupling with sealed reader-interface base
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Rigid straight probesFlexible sensor leadFast-response needle probeThermal barrierMulti-position reader stationReal-time wireless module

Planning a Temperature Validation Logger specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe