Temperature validation logger in three-quarter view with rigid probe

クリーンルーム試験 · 検証機器

Temperature 検証ロガー

A sealed stainless wireless logger with an interchangeable precision probe for thermal validation in sterilizers, chambers and process equipment.

Sealed process-ready stainless body.
Cable-free validation logging.
Interchangeable precision probes.

見積もりリクエスト製品案内

商品紹介

The compact cylindrical logger encloses its electronics and nonvolatile memory in a pressure-resistant 316L stainless body. A rigid low-mass temperature probe records process conditions without external cables, while a reader station programs the sampling sequence and retrieves stored measurements after the run. Interchangeable probe configurations adapt the same platform to chamber, load and penetration studies.

主要な特徴

Sealed stainless construction suits steam, water and thermal processes.

Internal memory preserves measurements through the complete validation cycle.

Rigid low-mass probe responds quickly at the selected measurement point.

Interchangeable sensor geometry supports different process loads.

Wireless readout avoids cable feed-throughs in closed equipment.

Multi-position reader dock accelerates setup and data collection.

お客様の製品に関する懸念事項

Thermal validation inside sealed process equipment requires accurate time-temperature records from the load itself without compromising the chamber boundary or losing data under harsh conditions.

External thermocouple cables can interfere with a closed process chamber.The self-contained logger records internally without a cable feed-through.

A bulky sensor can influence the temperature of a small load.The slim stainless probe minimizes thermal mass at the measurement point.

Data must survive pressure, moisture and temperature exposure.Sealed electronics and nonvolatile memory protect the recorded cycle data.

Different loads require different probe reach and geometry.Interchangeable rigid and flexible sensor options adapt the logger to each study.

典型的な用途

Steam sterilizer validationDepyrogenation and dry-heat studiesWasher-disinfector mappingCold chamber qualificationProcess vessel temperature profiling

技術的なパラメータ

Representative wireless validation-logger construction is listed below; probe length, sensor geometry and thermal protection can be configured for the process range.

コア材料	316L stainless logger body, precision temperature sensor, sealed electronics and nonvolatile memory
パネルの厚さ	Typically 1.0-2.0 mm for cylindrical pressure-resistant housing wall
有効幅	Approximately 20-40 mm logger-body diameter
最大長さ	Approximately 120-300 mm including rigid temperature probe
鋼鉄の厚さを直面する	Typically 0.5-1.0 mm for stainless probe sheath
コア密度	Approximately 7950-8000 kg/m³ for 316L stainless steel
熱伝導率	316L ステンレス鋼の場合、約 14 — 16 W / （ m · K ）
表面仕上げ	Electropolished or satin 316L stainless body with dark sealing ring and identification band
ジョイントタイプ	Threaded interchangeable sensor coupling with sealed reader-interface base
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Rigid straight probesFlexible sensor leadFast-response needle probeThermal barrierMulti-position reader stationReal-time wireless module

Planning a Temperature Validation Logger specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する