English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
منضدة الفولاذ المقاوم للصدأ
A fully welded stainless workbench with a sealed sanitary top and open cleanable frame for routine processing, assembly and laboratory work.
- Fully welded hygienic frame
- 304 or 316L stainless steel
- Smooth sealed work surface
- Leveling feet or cleanroom casters
مقدمة المنتج
The stainless steel workbench combines a folded and reinforced worktop with a continuously welded tubular base. Ground welds, closed tube ends and radiused exposed edges reduce crevices that can retain residue. The open underbench geometry leaves the floor and frame accessible for wiping, while adjustable feet compensate for small floor variations. Solid, perforated or marine-edge tops can be selected to suit dry assembly, liquid handling or vertical-airflow areas.
الخصائص الرئيسية
Continuous frame welds close tube intersections that would otherwise collect particles or wash residue.
Adjustable non-marking feet keep the surface level without exposing threaded crevices above the floor line.
Open-base construction permits unobstructed floor cleaning and accepts mobile underbench equipment.
مخاوف المنتج للعملاء
A cleanroom work surface must remain stable under equipment while exposing every surrounding surface to routine cleaning.
Bolted frames loosen and create inaccessible joints below the worktop.A continuously welded tubular base removes routine fastener joints and keeps the load path rigid.
Open sheet edges and rough welds retain wiping fibres and process residue.Folded edges and polished welds provide smooth transitions around the entire bench.
Uneven floors make precision fixtures rock during use.Individually adjustable cleanroom feet level the bench at all four corners.
Fixed lower bracing obstructs floor sanitation and mobile equipment.An open or three-sided base preserves cleaning access and operator knee clearance.
تطبيقات نموذجية
Pharmaceutical component preparationMedical-device assemblyCleanroom laboratory workSterile packaging supportElectronics inspection
المعلمات الفنية
Typical configurable specifications for a stainless steel cleanroom workbench are listed below.
| المواد الأساسية | Solid Type 304 stainless steel; Type 316L optional for aggressive cleaning environments |
|---|---|
| سمك اللوحة | 1.2–2.0 mm formed worktop skin with reinforced underside |
| العرض الفعال | 600–900 mm work surface depth |
| الحد الأقصى الطول | 2400 mm |
| الصلب يواجه سمك | 1.2-2.0 ملم الفولاذ المقاوم للصدأ |
| الكثافة الأساسية | 7900-8000 كجم / م3 الصلبة الفولاذ المقاوم للصدأ |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Brushed No. 4 or electropolished sanitary finish with ground welds |
| نوع المشترك | Continuous welded tube frame with folded sealed worktop edges |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Solid or perforated worktopRear backsplash or marine edgeRemovable undershelfLocking cleanroom casters
Planning a Stainless Steel Workbench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
