Three-quarter view of fully welded stainless steel cleanroom workbench

Perabot bilik bersih dan produk keluli tahan karat

Meja kerja keluli tahan karat

A fully welded stainless workbench with a sealed sanitary top and open cleanable frame for routine processing, assembly and laboratory work.

Fully welded hygienic frame
304 or 316L stainless steel
Smooth sealed work surface
Leveling feet or cleanroom casters

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The stainless steel workbench combines a folded and reinforced worktop with a continuously welded tubular base. Ground welds, closed tube ends and radiused exposed edges reduce crevices that can retain residue. The open underbench geometry leaves the floor and frame accessible for wiping, while adjustable feet compensate for small floor variations. Solid, perforated or marine-edge tops can be selected to suit dry assembly, liquid handling or vertical-airflow areas.

Ciri-ciri Utama

A reinforced stainless top resists sagging under distributed instruments and production fixtures.

Continuous frame welds close tube intersections that would otherwise collect particles or wash residue.

Adjustable non-marking feet keep the surface level without exposing threaded crevices above the floor line.

Open-base construction permits unobstructed floor cleaning and accepts mobile underbench equipment.

Kebimbangan Produk Pelanggan

A cleanroom work surface must remain stable under equipment while exposing every surrounding surface to routine cleaning.

Bolted frames loosen and create inaccessible joints below the worktop.A continuously welded tubular base removes routine fastener joints and keeps the load path rigid.

Open sheet edges and rough welds retain wiping fibres and process residue.Folded edges and polished welds provide smooth transitions around the entire bench.

Uneven floors make precision fixtures rock during use.Individually adjustable cleanroom feet level the bench at all four corners.

Fixed lower bracing obstructs floor sanitation and mobile equipment.An open or three-sided base preserves cleaning access and operator knee clearance.

Permohonan yang biasa

Pharmaceutical component preparationMedical-device assemblyCleanroom laboratory workSterile packaging supportElectronics inspection

Parameter teknikal

Typical configurable specifications for a stainless steel cleanroom workbench are listed below.

Bahan Teras	Solid Type 304 stainless steel; Type 316L optional for aggressive cleaning environments
Ketebalan Panel	1.2–2.0 mm formed worktop skin with reinforced underside
Lebar berkesan	Kedalaman permukaan kerja 600-900 mm
Panjang maksimum	2400 mm / jam
Keluli Menghadapi Ketebalan	1.2 - 2.0 mm keluli tahan karat
Ketumpatan teras	7900-8000 kg / m3 keluli tahan karat pepejal
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Brushed No. 4 or electropolished sanitary finish with ground welds
Jenis Bersatu	Continuous welded tube frame with folded sealed worktop edges
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Solid or perforated worktopRear backsplash or marine edgeRemovable undershelfLocking cleanroom casters

Planning a Stainless Steel Workbench specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami