İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
Paslanmaz Çelik Workbench
A fully welded stainless workbench with a sealed sanitary top and open cleanable frame for routine processing, assembly and laboratory work.
- Fully welded hygienic frame
- 304 or 316L stainless steel
- Smooth sealed work surface
- Leveling feet or cleanroom casters
Ürün tanıtımı
The stainless steel workbench combines a folded and reinforced worktop with a continuously welded tubular base. Ground welds, closed tube ends and radiused exposed edges reduce crevices that can retain residue. The open underbench geometry leaves the floor and frame accessible for wiping, while adjustable feet compensate for small floor variations. Solid, perforated or marine-edge tops can be selected to suit dry assembly, liquid handling or vertical-airflow areas.
Ana Özellikler
Continuous frame welds close tube intersections that would otherwise collect particles or wash residue.
Adjustable non-marking feet keep the surface level without exposing threaded crevices above the floor line.
Open-base construction permits unobstructed floor cleaning and accepts mobile underbench equipment.
Müşteri Ürün Sorunları
A cleanroom work surface must remain stable under equipment while exposing every surrounding surface to routine cleaning.
Bolted frames loosen and create inaccessible joints below the worktop.A continuously welded tubular base removes routine fastener joints and keeps the load path rigid.
Open sheet edges and rough welds retain wiping fibres and process residue.Folded edges and polished welds provide smooth transitions around the entire bench.
Uneven floors make precision fixtures rock during use.Individually adjustable cleanroom feet level the bench at all four corners.
Fixed lower bracing obstructs floor sanitation and mobile equipment.An open or three-sided base preserves cleaning access and operator knee clearance.
Tipik uygulamalar
Pharmaceutical component preparationMedical-device assemblyCleanroom laboratory workSterile packaging supportElectronics inspection
Teknik parametreler
Typical configurable specifications for a stainless steel cleanroom workbench are listed below.
| Temel malzemeler | Solid Type 304 stainless steel; Type 316L optional for aggressive cleaning environments |
|---|---|
| Panel kalınlığı | 1.2–2.0 mm formed worktop skin with reinforced underside |
| Effective Width (Etkili Genişlik) | 600–900 mm work surface depth |
| Maksimum uzunluk | 2400 mm |
| Çelik yüz yüze kalınlığı | 1.2-2.0 mm paslanmaz çelik |
| Core Density (Çekirdek Yoğunluğu) | 7900-8000 kg / m3 katı paslanmaz çelik |
| Termal İletkenlik | Austenit paslanmaz çelik için 14-16 W / (m · K) |
| Yüzey bitirme | Brushed No. 4 or electropolished sanitary finish with ground welds |
| Ortak tip | Continuous welded tube frame with folded sealed worktop edges |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Solid or perforated worktopRear backsplash or marine edgeRemovable undershelfLocking cleanroom casters
Planning a Stainless Steel Workbench specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
