Three-quarter view of fully welded stainless steel cleanroom workbench

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 워크벤치

A fully welded stainless workbench with a sealed sanitary top and open cleanable frame for routine processing, assembly and laboratory work.

Fully welded hygienic frame
304 or 316L stainless steel
Smooth sealed work surface
Leveling feet or cleanroom casters

견적 요청 제품 찾아보기

상품 소개

The stainless steel workbench combines a folded and reinforced worktop with a continuously welded tubular base. Ground welds, closed tube ends and radiused exposed edges reduce crevices that can retain residue. The open underbench geometry leaves the floor and frame accessible for wiping, while adjustable feet compensate for small floor variations. Solid, perforated or marine-edge tops can be selected to suit dry assembly, liquid handling or vertical-airflow areas.

주요 기능

A reinforced stainless top resists sagging under distributed instruments and production fixtures.

Continuous frame welds close tube intersections that would otherwise collect particles or wash residue.

Adjustable non-marking feet keep the surface level without exposing threaded crevices above the floor line.

Open-base construction permits unobstructed floor cleaning and accepts mobile underbench equipment.

고객 제품 관심사

A cleanroom work surface must remain stable under equipment while exposing every surrounding surface to routine cleaning.

Bolted frames loosen and create inaccessible joints below the worktop.A continuously welded tubular base removes routine fastener joints and keeps the load path rigid.

Open sheet edges and rough welds retain wiping fibres and process residue.Folded edges and polished welds provide smooth transitions around the entire bench.

Uneven floors make precision fixtures rock during use.Individually adjustable cleanroom feet level the bench at all four corners.

Fixed lower bracing obstructs floor sanitation and mobile equipment.An open or three-sided base preserves cleaning access and operator knee clearance.

일반적인 응용 프로그램

Pharmaceutical component preparationMedical-device assemblyCleanroom laboratory workSterile packaging supportElectronics inspection

기술 매개변수

Typical configurable specifications for a stainless steel cleanroom workbench are listed below.

핵심 재료	Solid Type 304 stainless steel; Type 316L optional for aggressive cleaning environments
패널 두께	1.2–2.0 mm formed worktop skin with reinforced underside
유효 폭	600–900 mm work surface depth
최대 길이	2400 mm
강철 면면 두께	1. 2 - 2. 0 mm 스테인레스 스틸
코어 밀도	7900 - 8000 kg / m 3 솔리드 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Brushed No. 4 or electropolished sanitary finish with ground welds
접합 유형	Continuous welded tube frame with folded sealed worktop edges
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Solid or perforated worktopRear backsplash or marine edgeRemovable undershelfLocking cleanroom casters

Planning a Stainless Steel Workbench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.