English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Мебель для чистых комнат и изделия из нержавеющей стали
Рабочий стол из нержавеющей стали
A fully welded stainless workbench with a sealed sanitary top and open cleanable frame for routine processing, assembly and laboratory work.
- Fully welded hygienic frame
- 304 or 316L stainless steel
- Smooth sealed work surface
- Leveling feet or cleanroom casters
Введение продукции
The stainless steel workbench combines a folded and reinforced worktop with a continuously welded tubular base. Ground welds, closed tube ends and radiused exposed edges reduce crevices that can retain residue. The open underbench geometry leaves the floor and frame accessible for wiping, while adjustable feet compensate for small floor variations. Solid, perforated or marine-edge tops can be selected to suit dry assembly, liquid handling or vertical-airflow areas.
Основные характеристики
Continuous frame welds close tube intersections that would otherwise collect particles or wash residue.
Adjustable non-marking feet keep the surface level without exposing threaded crevices above the floor line.
Open-base construction permits unobstructed floor cleaning and accepts mobile underbench equipment.
Обеспокоенность клиентов продуктами
A cleanroom work surface must remain stable under equipment while exposing every surrounding surface to routine cleaning.
Bolted frames loosen and create inaccessible joints below the worktop.A continuously welded tubular base removes routine fastener joints and keeps the load path rigid.
Open sheet edges and rough welds retain wiping fibres and process residue.Folded edges and polished welds provide smooth transitions around the entire bench.
Uneven floors make precision fixtures rock during use.Individually adjustable cleanroom feet level the bench at all four corners.
Fixed lower bracing obstructs floor sanitation and mobile equipment.An open or three-sided base preserves cleaning access and operator knee clearance.
Типичные приложения
Pharmaceutical component preparationMedical-device assemblyCleanroom laboratory workSterile packaging supportElectronics inspection
Технические параметры
Typical configurable specifications for a stainless steel cleanroom workbench are listed below.
| Основной материал | Solid Type 304 stainless steel; Type 316L optional for aggressive cleaning environments |
|---|---|
| Толщина панели | 1.2–2.0 mm formed worktop skin with reinforced underside |
| эффективная ширина | 600–900 mm work surface depth |
| Максимальная длина | 2400 mm |
| Толщина линий стали | 1.2–2.0 mm stainless steel |
| Плотность ядра | 7900–8000 kg/m³ solid stainless steel |
| Теплопроводимость | 14–16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Brushed No. 4 or electropolished sanitary finish with ground welds |
| Объединенный тип | Continuous welded tube frame with folded sealed worktop edges |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Solid or perforated worktopRear backsplash or marine edgeRemovable undershelfLocking cleanroom casters
Planning a Stainless Steel Workbench specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
