English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
الفولاذ المقاوم للصدأ غسل بالوعة
A freestanding Type 316L manual tool-washing station with two deep coved bowls, a sloped right drainboard, pre-rinse spray, perforated insert and adjustable stainless frame.
- Two-stage wash and rinse bowls
- Sloped right drainboard
- Flexible pre-rinse spray
- Type 316L wetted surfaces
مقدمة المنتج
This stainless steel washing sink separates detergent washing and final rinsing across two 500 mm-square coved bowls. A flexible pre-rinse hose reaches both compartments, and a removable blue perforated insert supports small change parts above the left bowl waste. The right-hand drainboard is cross-broken toward the rinse bowl so washed tools can drip without pooling on a flat work surface. Type 316L wetted surfaces, a 100 mm rear upstand and open tubular underframe suit repeated manual cleaning of format parts and small process containers.
الخصائص الرئيسية
A blue removable perforated insert supports small parts above the drain and prevents direct impact on the bowl base.
The right drainboard uses formed drainage ribs and a deliberate fall back to the adjacent bowl.
An open stainless tubular frame leaves traps, valves and hose connections visible for cleaning and service.
مخاوف المنتج للعملاء
Manual process-part cleaning needs distinct wash and rinse stages, a controlled drip area and enough bowl depth for awkward components without hiding wet plumbing inside a cabinet.
Using one bowl for detergent and final rinse carries residue back onto cleaned parts.Two physically separate coved bowls support defined wash and rinse steps.
Small tooling strikes the waste fitting or blocks the outlet during washing.The removable perforated insert holds parts above the bowl floor and strainer.
Freshly rinsed components leave standing water across a level worktop.The ribbed drainboard is cross-broken toward the rinse compartment.
Closed base cabinets conceal leaking hose, mixer and drain connections.The open tubular frame keeps all wet services visible and directly accessible.
تطبيقات نموذجية
Pharmaceutical change-part washingBiotechnology process-tool rinsingClean packaging format-part cleaningLaboratory container wash areasHigh-care food tooling stations
المعلمات الفنية
Typical configurable specifications for a two-bowl cleanroom tool washing sink are listed below.
| المواد الأساسية | Type 316L stainless twin coved bowls and drainboard with blue perforated polymer insert and Type 304 tubular frame |
|---|---|
| سمك اللوحة | 2.0 mm 14-gauge welded bowl and drainboard assembly |
| العرض الفعال | 1600 mm overall two-bowl and drainboard working width |
| الحد الأقصى الطول | 750 mm maximum front-to-back worktop depth |
| الصلب يواجه سمك | 2.0 mm Type 316L wetted surfaces; 1.5 mm Type 304 frame components |
| الكثافة الأساسية | 7950–8050 kg/m³ for Type 316L stainless steel |
| الموصلية الحرارية | 13–16 W/(m·K) for Type 316L stainless steel |
| إنهاء السطح | Satin-brushed exterior, smooth coved bowls, passivated welds and blue removable perforated insert |
| نوع المشترك | Fully welded twin-bowl top with sloped drainboard, 100 mm rear upstand, 50 mm wastes and adjustable tubular-leg sockets |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Left-hand drainboardIntegrated drying rackType 316L underframeHot-water spray gun
Planning a Stainless Steel Washing Sink specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
