Type 316L cleanroom tool washing sink with twin bowls and drainboard

Мебель для чистых комнат и изделия из нержавеющей стали

Нержавеющая сталь мытья раковина

A freestanding Type 316L manual tool-washing station with two deep coved bowls, a sloped right drainboard, pre-rinse spray, perforated insert and adjustable stainless frame.

Two-stage wash and rinse bowls
Sloped right drainboard
Flexible pre-rinse spray
Type 316L wetted surfaces

Запрос котировки Просмотреть продукты

Введение продукции

This stainless steel washing sink separates detergent washing and final rinsing across two 500 mm-square coved bowls. A flexible pre-rinse hose reaches both compartments, and a removable blue perforated insert supports small change parts above the left bowl waste. The right-hand drainboard is cross-broken toward the rinse bowl so washed tools can drip without pooling on a flat work surface. Type 316L wetted surfaces, a 100 mm rear upstand and open tubular underframe suit repeated manual cleaning of format parts and small process containers.

Основные характеристики

Independent wash and rinse bowls keep detergent residue away from the final rinse stage.

A blue removable perforated insert supports small parts above the drain and prevents direct impact on the bowl base.

The right drainboard uses formed drainage ribs and a deliberate fall back to the adjacent bowl.

An open stainless tubular frame leaves traps, valves and hose connections visible for cleaning and service.

Обеспокоенность клиентов продуктами

Manual process-part cleaning needs distinct wash and rinse stages, a controlled drip area and enough bowl depth for awkward components without hiding wet plumbing inside a cabinet.

Using one bowl for detergent and final rinse carries residue back onto cleaned parts.Two physically separate coved bowls support defined wash and rinse steps.

Small tooling strikes the waste fitting or blocks the outlet during washing.The removable perforated insert holds parts above the bowl floor and strainer.

Freshly rinsed components leave standing water across a level worktop.The ribbed drainboard is cross-broken toward the rinse compartment.

Closed base cabinets conceal leaking hose, mixer and drain connections.The open tubular frame keeps all wet services visible and directly accessible.

Типичные приложения

Pharmaceutical change-part washingBiotechnology process-tool rinsingClean packaging format-part cleaningLaboratory container wash areasHigh-care food tooling stations

Технические параметры

Typical configurable specifications for a two-bowl cleanroom tool washing sink are listed below.

Основной материал	Type 316L stainless twin coved bowls and drainboard with blue perforated polymer insert and Type 304 tubular frame
Толщина панели	2.0 mm 14-gauge welded bowl and drainboard assembly
эффективная ширина	1600 mm overall two-bowl and drainboard working width
Максимальная длина	750 mm maximum front-to-back worktop depth
Толщина линий стали	2.0 mm Type 316L wetted surfaces; 1.5 mm Type 304 frame components
Плотность ядра	7950–8050 kg/m³ for Type 316L stainless steel
Теплопроводимость	13–16 W/(m·K) for Type 316L stainless steel
Поверхностная отделка	Satin-brushed exterior, smooth coved bowls, passivated welds and blue removable perforated insert
Объединенный тип	Fully welded twin-bowl top with sloped drainboard, 100 mm rear upstand, 50 mm wastes and adjustable tubular-leg sockets
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Left-hand drainboardIntegrated drying rackType 316L underframeHot-water spray gun

Planning a Stainless Steel Washing Sink specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой