Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
acier inoxydable lavabo
A freestanding Type 316L manual tool-washing station with two deep coved bowls, a sloped right drainboard, pre-rinse spray, perforated insert and adjustable stainless frame.
- Two-stage wash and rinse bowls
- Sloped right drainboard
- Flexible pre-rinse spray
- Type 316L wetted surfaces
Introduction de produit
This stainless steel washing sink separates detergent washing and final rinsing across two 500 mm-square coved bowls. A flexible pre-rinse hose reaches both compartments, and a removable blue perforated insert supports small change parts above the left bowl waste. The right-hand drainboard is cross-broken toward the rinse bowl so washed tools can drip without pooling on a flat work surface. Type 316L wetted surfaces, a 100 mm rear upstand and open tubular underframe suit repeated manual cleaning of format parts and small process containers.
Key Features
A blue removable perforated insert supports small parts above the drain and prevents direct impact on the bowl base.
The right drainboard uses formed drainage ribs and a deliberate fall back to the adjacent bowl.
An open stainless tubular frame leaves traps, valves and hose connections visible for cleaning and service.
Préoccupations du client produit
Manual process-part cleaning needs distinct wash and rinse stages, a controlled drip area and enough bowl depth for awkward components without hiding wet plumbing inside a cabinet.
Using one bowl for detergent and final rinse carries residue back onto cleaned parts.Two physically separate coved bowls support defined wash and rinse steps.
Small tooling strikes the waste fitting or blocks the outlet during washing.The removable perforated insert holds parts above the bowl floor and strainer.
Freshly rinsed components leave standing water across a level worktop.The ribbed drainboard is cross-broken toward the rinse compartment.
Closed base cabinets conceal leaking hose, mixer and drain connections.The open tubular frame keeps all wet services visible and directly accessible.
Les applications typiques
Pharmaceutical change-part washingBiotechnology process-tool rinsingClean packaging format-part cleaningLaboratory container wash areasHigh-care food tooling stations
Paramètres techniques
Typical configurable specifications for a two-bowl cleanroom tool washing sink are listed below.
| Matériaux de base | Type 316L stainless twin coved bowls and drainboard with blue perforated polymer insert and Type 304 tubular frame |
|---|---|
| Panneau épaisseur | 2.0 mm 14-gauge welded bowl and drainboard assembly |
| Largeur effective | 1600 mm overall two-bowl and drainboard working width |
| Longueur maximale | 750 mm maximum front-to-back worktop depth |
| Acier face épaisseur | 2.0 mm Type 316L wetted surfaces; 1.5 mm Type 304 frame components |
| Densité Core | 7950–8050 kg/m³ for Type 316L stainless steel |
| Conductivité thermique | 13–16 W/(m·K) for Type 316L stainless steel |
| surface finie | Satin-brushed exterior, smooth coved bowls, passivated welds and blue removable perforated insert |
| Type joint | Fully welded twin-bowl top with sloped drainboard, 100 mm rear upstand, 50 mm wastes and adjustable tubular-leg sockets |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Left-hand drainboardIntegrated drying rackType 316L underframeHot-water spray gun
Planning a Stainless Steel Washing Sink specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
