Type 316L cleanroom tool washing sink with twin bowls and drainboard

クリーンルーム家具 · ステンレス製品

ステンレス鋼洗浄シンク

A freestanding Type 316L manual tool-washing station with two deep coved bowls, a sloped right drainboard, pre-rinse spray, perforated insert and adjustable stainless frame.

Two-stage wash and rinse bowls
Sloped right drainboard
Flexible pre-rinse spray
Type 316L wetted surfaces

見積もりリクエスト製品案内

商品紹介

This stainless steel washing sink separates detergent washing and final rinsing across two 500 mm-square coved bowls. A flexible pre-rinse hose reaches both compartments, and a removable blue perforated insert supports small change parts above the left bowl waste. The right-hand drainboard is cross-broken toward the rinse bowl so washed tools can drip without pooling on a flat work surface. Type 316L wetted surfaces, a 100 mm rear upstand and open tubular underframe suit repeated manual cleaning of format parts and small process containers.

主要な特徴

Independent wash and rinse bowls keep detergent residue away from the final rinse stage.

A blue removable perforated insert supports small parts above the drain and prevents direct impact on the bowl base.

The right drainboard uses formed drainage ribs and a deliberate fall back to the adjacent bowl.

An open stainless tubular frame leaves traps, valves and hose connections visible for cleaning and service.

お客様の製品に関する懸念事項

Manual process-part cleaning needs distinct wash and rinse stages, a controlled drip area and enough bowl depth for awkward components without hiding wet plumbing inside a cabinet.

Using one bowl for detergent and final rinse carries residue back onto cleaned parts.Two physically separate coved bowls support defined wash and rinse steps.

Small tooling strikes the waste fitting or blocks the outlet during washing.The removable perforated insert holds parts above the bowl floor and strainer.

Freshly rinsed components leave standing water across a level worktop.The ribbed drainboard is cross-broken toward the rinse compartment.

Closed base cabinets conceal leaking hose, mixer and drain connections.The open tubular frame keeps all wet services visible and directly accessible.

典型的な用途

Pharmaceutical change-part washingBiotechnology process-tool rinsingClean packaging format-part cleaningLaboratory container wash areasHigh-care food tooling stations

技術的なパラメータ

Typical configurable specifications for a two-bowl cleanroom tool washing sink are listed below.

コア材料	Type 316L stainless twin coved bowls and drainboard with blue perforated polymer insert and Type 304 tubular frame
パネルの厚さ	2.0 mm 14-gauge welded bowl and drainboard assembly
有効幅	1600 mm overall two-bowl and drainboard working width
最大長さ	750 mm maximum front-to-back worktop depth
鋼鉄の厚さを直面する	2.0 mm Type 316L wetted surfaces; 1.5 mm Type 304 frame components
コア密度	タイプ 316L のステンレス鋼のための 7950 — 8050 kg / m3
熱伝導率	タイプ 316L ステンレス鋼の 13 — 16 W / （m · K）
表面仕上げ	Satin-brushed exterior, smooth coved bowls, passivated welds and blue removable perforated insert
ジョイントタイプ	Fully welded twin-bowl top with sloped drainboard, 100 mm rear upstand, 50 mm wastes and adjustable tubular-leg sockets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Left-hand drainboardIntegrated drying rackType 316L underframeHot-water spray gun

Planning a Stainless Steel Washing Sink specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する