English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مناولة وتخزين مواد الغرف النظيفة
الفولاذ المقاوم للصدأ سلم غرف الأبحاث
A freestanding stainless steel cleanroom ladder with perforated anti-slip treads, an elevated platform, high handrail and non-marking stabilizing feet.
- Fully stainless frame withstands routine controlled-area cleaning
- Perforated treads reduce horizontal particle-collection surfaces
- High handrail and stable A-frame support secure access
مقدمة المنتج
This cleanroom ladder uses a welded stainless A-frame, four perforated access treads and a full standing platform for maintenance access without painted or shedding structural surfaces. A high tubular handrail provides an upper contact point, while wide tread pans and non-marking feet support stable positioning. Open geometry makes the frame accessible for wipe-down and visual inspection.
الخصائص الرئيسية
Perforated tread surfaces encourage airflow and shed loose debris.
Four broad treads provide progressive access to the top platform.
High U-shaped handrail supports entry, exit and platform stance.
Non-marking feet isolate metal legs from finished cleanroom floors.
مخاوف المنتج للعملاء
Ordinary painted ladders can shed coatings, trap residue in joints and mark controlled-area floors, while narrow rungs and low handholds make repeated access uncomfortable.
Shedding surface finishesUnpainted stainless construction eliminates flaking paint from the frame.
Difficult tread cleaningPerforated pans expose both sides for inspection and wipe-down.
Unstable elevated accessThe A-frame footprint, rear braces and non-marking feet provide a stable base.
Limited hand supportThe extended U-shaped rail remains accessible above the platform.
تطبيقات نموذجية
Filter replacement, equipment inspection, elevated cleaning, storage access and maintenance work in pharmaceutical, biotechnology, medical-device, electronics and laboratory clean areas.
المعلمات الفنية
The front climbing rails carry four evenly spaced perforated tread pans below a perforated standing platform. Rear support rails and cross-bracing stabilize the freestanding footprint. Frame grade, tread width, platform height, surface finish and foot material are selected for cleaning chemistry, operator footwear and access height. The final duty rating must be confirmed for the supplied configuration.
| المواد الأساسية | 304 or 316L stainless steel tubular frame and perforated treads |
|---|---|
| سمك اللوحة | 1.5–3.0 mm tread and platform panels |
| العرض الفعال | 450–750 mm usable climbing width |
| الحد الأقصى الطول | Up to 2400 mm overall ladder height |
| الصلب يواجه سمك | 1.5–2.5 mm exposed stainless tread surfaces |
| الكثافة الأساسية | 8000 كجم / m3 كثافة الفولاذ المقاوم للصدأ الاسمية |
| الموصلية الحرارية | حوالي 14.6-16.2 W / (m·K) في درجة حرارة الغرفة |
| إنهاء السطح | الفولاذ المقاوم للصدأ المصقول أو المصقول ميكانيكيا أو كهربائياً |
| نوع المشترك | Continuously welded tubular A-frame with fixed perforated treads and non-marking feet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L stainless steel, alternative tread counts, wider platform, electropolished finish, conductive or non-marking feet, grounding provision, folding configuration and application-specific handrail geometry.
Planning a Stainless Steel Cleanroom Ladder specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
