영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 재료 취급 및 보관
스테인레스 스틸 클린룸 사다리
A freestanding stainless steel cleanroom ladder with perforated anti-slip treads, an elevated platform, high handrail and non-marking stabilizing feet.
- Fully stainless frame withstands routine controlled-area cleaning
- Perforated treads reduce horizontal particle-collection surfaces
- High handrail and stable A-frame support secure access
상품 소개
This cleanroom ladder uses a welded stainless A-frame, four perforated access treads and a full standing platform for maintenance access without painted or shedding structural surfaces. A high tubular handrail provides an upper contact point, while wide tread pans and non-marking feet support stable positioning. Open geometry makes the frame accessible for wipe-down and visual inspection.
주요 기능
Perforated tread surfaces encourage airflow and shed loose debris.
Four broad treads provide progressive access to the top platform.
High U-shaped handrail supports entry, exit and platform stance.
Non-marking feet isolate metal legs from finished cleanroom floors.
고객 제품 관심사
Ordinary painted ladders can shed coatings, trap residue in joints and mark controlled-area floors, while narrow rungs and low handholds make repeated access uncomfortable.
Shedding surface finishesUnpainted stainless construction eliminates flaking paint from the frame.
Difficult tread cleaningPerforated pans expose both sides for inspection and wipe-down.
Unstable elevated accessThe A-frame footprint, rear braces and non-marking feet provide a stable base.
Limited hand supportThe extended U-shaped rail remains accessible above the platform.
일반적인 응용 프로그램
Filter replacement, equipment inspection, elevated cleaning, storage access and maintenance work in pharmaceutical, biotechnology, medical-device, electronics and laboratory clean areas.
기술 매개변수
The front climbing rails carry four evenly spaced perforated tread pans below a perforated standing platform. Rear support rails and cross-bracing stabilize the freestanding footprint. Frame grade, tread width, platform height, surface finish and foot material are selected for cleaning chemistry, operator footwear and access height. The final duty rating must be confirmed for the supplied configuration.
| 핵심 재료 | 304 or 316L stainless steel tubular frame and perforated treads |
|---|---|
| 패널 두께 | 1.5–3.0 mm tread and platform panels |
| 유효 폭 | 450–750 mm usable climbing width |
| 최대 길이 | Up to 2400 mm overall ladder height |
| 강철 면면 두께 | 1.5–2.5 mm exposed stainless tread surfaces |
| 코어 밀도 | 8000 kg / m 3 명칭 스테인레스 강철 밀도 |
| 열전도도 (Thermal Conductivity) | 약 14. 6 - 16. 2 W / (m · K) 실온에서 |
| 표면 마무리 | 미세 브러시, 기계 연마 또는 전기 연마 스테인레스 스틸 |
| 접합 유형 | Continuously welded tubular A-frame with fixed perforated treads and non-marking feet |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
304 or 316L stainless steel, alternative tread counts, wider platform, electropolished finish, conductive or non-marking feet, grounding provision, folding configuration and application-specific handrail geometry.
Planning a Stainless Steel Cleanroom Ladder specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
