Complete stainless steel cleanroom ladder in three-quarter front view

クリーンルーム材料の取り扱い · 貯蔵

ステンレス鋼クリーンルームはしご

A freestanding stainless steel cleanroom ladder with perforated anti-slip treads, an elevated platform, high handrail and non-marking stabilizing feet.

Fully stainless frame withstands routine controlled-area cleaning
Perforated treads reduce horizontal particle-collection surfaces
High handrail and stable A-frame support secure access

見積もりリクエスト製品案内

商品紹介

This cleanroom ladder uses a welded stainless A-frame, four perforated access treads and a full standing platform for maintenance access without painted or shedding structural surfaces. A high tubular handrail provides an upper contact point, while wide tread pans and non-marking feet support stable positioning. Open geometry makes the frame accessible for wipe-down and visual inspection.

主要な特徴

Stainless tubular frame resists corrosion and avoids flaking coatings.

Perforated tread surfaces encourage airflow and shed loose debris.

Four broad treads provide progressive access to the top platform.

High U-shaped handrail supports entry, exit and platform stance.

Non-marking feet isolate metal legs from finished cleanroom floors.

お客様の製品に関する懸念事項

Ordinary painted ladders can shed coatings, trap residue in joints and mark controlled-area floors, while narrow rungs and low handholds make repeated access uncomfortable.

Shedding surface finishesUnpainted stainless construction eliminates flaking paint from the frame.

Difficult tread cleaningPerforated pans expose both sides for inspection and wipe-down.

Unstable elevated accessThe A-frame footprint, rear braces and non-marking feet provide a stable base.

Limited hand supportThe extended U-shaped rail remains accessible above the platform.

典型的な用途

Filter replacement, equipment inspection, elevated cleaning, storage access and maintenance work in pharmaceutical, biotechnology, medical-device, electronics and laboratory clean areas.

技術的なパラメータ

The front climbing rails carry four evenly spaced perforated tread pans below a perforated standing platform. Rear support rails and cross-bracing stabilize the freestanding footprint. Frame grade, tread width, platform height, surface finish and foot material are selected for cleaning chemistry, operator footwear and access height. The final duty rating must be confirmed for the supplied configuration.

コア材料	304 or 316L stainless steel tubular frame and perforated treads
パネルの厚さ	1.5–3.0 mm tread and platform panels
有効幅	450–750 mm usable climbing width
最大長さ	Up to 2400 mm overall ladder height
鋼鉄の厚さを直面する	1.5–2.5 mm exposed stainless tread surfaces
コア密度	8000 kg / m3 公称ステンレス鋼の密度
熱伝導率	室温で約 14.6 — 16.2 W / （m · K）
表面仕上げ	精密ブラシ、機械研磨または電気研磨ステンレス鋼
ジョイントタイプ	Continuously welded tubular A-frame with fixed perforated treads and non-marking feet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

304 or 316L stainless steel, alternative tread counts, wider platform, electropolished finish, conductive or non-marking feet, grounding provision, folding configuration and application-specific handrail geometry.

Planning a Stainless Steel Cleanroom Ladder specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する