Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Manejo y almacenamiento de materiales de sala limpia
Acero inoxidable escalera de sala limpia
A freestanding stainless steel cleanroom ladder with perforated anti-slip treads, an elevated platform, high handrail and non-marking stabilizing feet.
- Fully stainless frame withstands routine controlled-area cleaning
- Perforated treads reduce horizontal particle-collection surfaces
- High handrail and stable A-frame support secure access
Introducción del producto
This cleanroom ladder uses a welded stainless A-frame, four perforated access treads and a full standing platform for maintenance access without painted or shedding structural surfaces. A high tubular handrail provides an upper contact point, while wide tread pans and non-marking feet support stable positioning. Open geometry makes the frame accessible for wipe-down and visual inspection.
Características clave
Perforated tread surfaces encourage airflow and shed loose debris.
Four broad treads provide progressive access to the top platform.
High U-shaped handrail supports entry, exit and platform stance.
Non-marking feet isolate metal legs from finished cleanroom floors.
Preocupaciones del producto del cliente
Ordinary painted ladders can shed coatings, trap residue in joints and mark controlled-area floors, while narrow rungs and low handholds make repeated access uncomfortable.
Shedding surface finishesUnpainted stainless construction eliminates flaking paint from the frame.
Difficult tread cleaningPerforated pans expose both sides for inspection and wipe-down.
Unstable elevated accessThe A-frame footprint, rear braces and non-marking feet provide a stable base.
Limited hand supportThe extended U-shaped rail remains accessible above the platform.
Aplicaciones típicas
Filter replacement, equipment inspection, elevated cleaning, storage access and maintenance work in pharmaceutical, biotechnology, medical-device, electronics and laboratory clean areas.
Parámetros técnicos
The front climbing rails carry four evenly spaced perforated tread pans below a perforated standing platform. Rear support rails and cross-bracing stabilize the freestanding footprint. Frame grade, tread width, platform height, surface finish and foot material are selected for cleaning chemistry, operator footwear and access height. The final duty rating must be confirmed for the supplied configuration.
| Materiales Core | 304 or 316L stainless steel tubular frame and perforated treads |
|---|---|
| Panel de espesor | 1.5–3.0 mm tread and platform panels |
| Ancho efectivo | 450–750 mm usable climbing width |
| Longitud máxima | Up to 2400 mm overall ladder height |
| Acero frente a espesor | 1.5–2.5 mm exposed stainless tread surfaces |
| Densidad Core | 8000 kg / m3 densidad nominal de acero inoxidable |
| Conductividad térmica | 14.6 - 16.2 W / (m · K) a temperatura ambiente por |
| Superficie acabada | Acero inoxidable pulido mecánicamente o electropolido |
| Tipo conjunto | Continuously welded tubular A-frame with fixed perforated treads and non-marking feet |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316L stainless steel, alternative tread counts, wider platform, electropolished finish, conductive or non-marking feet, grounding provision, folding configuration and application-specific handrail geometry.
Planning a Stainless Steel Cleanroom Ladder specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
