Complete stainless steel cleanroom ladder in three-quarter front view

Pengendalian dan Penyimpanan Bahan Bilik Bersih

Tangga bilik bersih keluli tahan karat

A freestanding stainless steel cleanroom ladder with perforated anti-slip treads, an elevated platform, high handrail and non-marking stabilizing feet.

Fully stainless frame withstands routine controlled-area cleaning
Perforated treads reduce horizontal particle-collection surfaces
High handrail and stable A-frame support secure access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This cleanroom ladder uses a welded stainless A-frame, four perforated access treads and a full standing platform for maintenance access without painted or shedding structural surfaces. A high tubular handrail provides an upper contact point, while wide tread pans and non-marking feet support stable positioning. Open geometry makes the frame accessible for wipe-down and visual inspection.

Ciri-ciri Utama

Stainless tubular frame resists corrosion and avoids flaking coatings.

Perforated tread surfaces encourage airflow and shed loose debris.

Four broad treads provide progressive access to the top platform.

High U-shaped handrail supports entry, exit and platform stance.

Non-marking feet isolate metal legs from finished cleanroom floors.

Kebimbangan Produk Pelanggan

Ordinary painted ladders can shed coatings, trap residue in joints and mark controlled-area floors, while narrow rungs and low handholds make repeated access uncomfortable.

Shedding surface finishesUnpainted stainless construction eliminates flaking paint from the frame.

Difficult tread cleaningPerforated pans expose both sides for inspection and wipe-down.

Unstable elevated accessThe A-frame footprint, rear braces and non-marking feet provide a stable base.

Limited hand supportThe extended U-shaped rail remains accessible above the platform.

Permohonan yang biasa

Filter replacement, equipment inspection, elevated cleaning, storage access and maintenance work in pharmaceutical, biotechnology, medical-device, electronics and laboratory clean areas.

Parameter teknikal

The front climbing rails carry four evenly spaced perforated tread pans below a perforated standing platform. Rear support rails and cross-bracing stabilize the freestanding footprint. Frame grade, tread width, platform height, surface finish and foot material are selected for cleaning chemistry, operator footwear and access height. The final duty rating must be confirmed for the supplied configuration.

Bahan Teras	304 or 316L stainless steel tubular frame and perforated treads
Ketebalan Panel	1.5–3.0 mm tread and platform panels
Lebar berkesan	450–750 mm usable climbing width
Panjang maksimum	Up to 2400 mm overall ladder height
Keluli Menghadapi Ketebalan	1.5–2.5 mm exposed stainless tread surfaces
Ketumpatan teras	8000 kg / m3 nominal ketumpatan keluli tahan karat
Kekonduksian Terma	Kira-kira 14.6-16.2 W / (m · K) pada suhu bilik
Kemasan permukaan	Keluli tahan karat halus, digilap secara mekanikal atau elektro digilap
Jenis Bersatu	Continuously welded tubular A-frame with fixed perforated treads and non-marking feet
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

304 or 316L stainless steel, alternative tread counts, wider platform, electropolished finish, conductive or non-marking feet, grounding provision, folding configuration and application-specific handrail geometry.

Planning a Stainless Steel Cleanroom Ladder specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami