English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
صمام فراشة الانقسام
A two-part containment valve whose active and passive halves seal separate vessels, then dock and open as one butterfly disc for powder transfer.
- Active and Passive Half Valves
- Closed Docking Sequence
- Contained Powder Discharge
- Manual or Automated Actuation
مقدمة المنتج
The split butterfly valve connects a source container to a receiving vessel without leaving one open valve face exposed. Each half closes its own container. After docking, the two disc halves lock together and act as one butterfly valve; powder transfers through the combined bore, then the valve closes before undocking. The active half contains the drive mechanism, while passive halves can remain on multiple bins or bags. Valve diameter, seals and cleaning method are selected for the powder and process.
الخصائص الرئيسية
Docking joins the two exposed disc faces before the transfer bore opens.
One active actuator can operate compatible passive units on multiple containers.
Free-orientation or guided docking options accommodate container alignment.
Removable product-contact parts support inspection and cleaning.
مخاوف المنتج للعملاء
Contained powder transfer depends on the two valve halves aligning, sealing and completing the correct close-before-undock sequence.
Opening a conventional valve exposes the mating face to powder.The split discs join their exposed faces before the combined bore opens.
A suspended IBC is difficult to align precisely.Guided or free-orientation docking tolerates normal positioning variation.
Operators disconnect while the disc remains open.Mechanical interlocks block separation until the combined valve is closed.
Product residue remains on complex valve parts.Quick-release product-contact components allow planned cleaning or changeover.
تطبيقات نموذجية
IBC dischargeVessel chargingPotent powder transferContained blending and compression feed
المعلمات الفنية
Typical configurable construction ranges for a pharmaceutical split butterfly valve are listed below.
| المواد الأساسية | SUS316L active and passive valve bodies with engineering-polymer actuator components and silicone or EPDM seals |
|---|---|
| سمك اللوحة | 20-45 mm valve-body wall and docking-ring sections |
| العرض الفعال | 100-250 mm nominal transfer bore |
| الحد الأقصى الطول | Up to 450 mm overall docked valve height |
| الصلب يواجه سمك | 3.0-8.0 mm SUS316L product-contact body sections |
| الكثافة الأساسية | Approximately 8000 kg/m³ for SUS316L product-contact components |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Electropolished or mechanically polished SUS316L product-contact surfaces |
| نوع المشترك | Interlocked active-passive docking ring with split disc, circumferential seals and manual or pneumatic actuator |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
100-250 mm nominal sizesManual or pneumatic actuationContainer-lift and docking aidWash-in-place or removable core
Planning a Split Butterfly Valve specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
