Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Válvula de mariposa por
A two-part containment valve whose active and passive halves seal separate vessels, then dock and open as one butterfly disc for powder transfer.
- Active and Passive Half Valves
- Closed Docking Sequence
- Contained Powder Discharge
- Manual or Automated Actuation
Introducción del producto
The split butterfly valve connects a source container to a receiving vessel without leaving one open valve face exposed. Each half closes its own container. After docking, the two disc halves lock together and act as one butterfly valve; powder transfers through the combined bore, then the valve closes before undocking. The active half contains the drive mechanism, while passive halves can remain on multiple bins or bags. Valve diameter, seals and cleaning method are selected for the powder and process.
Características clave
Docking joins the two exposed disc faces before the transfer bore opens.
One active actuator can operate compatible passive units on multiple containers.
Free-orientation or guided docking options accommodate container alignment.
Removable product-contact parts support inspection and cleaning.
Preocupaciones del producto del cliente
Contained powder transfer depends on the two valve halves aligning, sealing and completing the correct close-before-undock sequence.
Opening a conventional valve exposes the mating face to powder.The split discs join their exposed faces before the combined bore opens.
A suspended IBC is difficult to align precisely.Guided or free-orientation docking tolerates normal positioning variation.
Operators disconnect while the disc remains open.Mechanical interlocks block separation until the combined valve is closed.
Product residue remains on complex valve parts.Quick-release product-contact components allow planned cleaning or changeover.
Aplicaciones típicas
IBC dischargeVessel chargingPotent powder transferContained blending and compression feed
Parámetros técnicos
Typical configurable construction ranges for a pharmaceutical split butterfly valve are listed below.
| Materiales Core | SUS316L active and passive valve bodies with engineering-polymer actuator components and silicone or EPDM seals |
|---|---|
| Panel de espesor | 20-45 mm valve-body wall and docking-ring sections |
| Ancho efectivo | 100-250 mm nominal transfer bore |
| Longitud máxima | Up to 450 mm overall docked valve height |
| Acero frente a espesor | 3.0-8.0 mm SUS316L product-contact body sections |
| Densidad Core | Approximately 8000 kg/m³ for SUS316L product-contact components |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Electropolished or mechanically polished SUS316L product-contact surfaces |
| Tipo conjunto | Interlocked active-passive docking ring with split disc, circumferential seals and manual or pneumatic actuator |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
100-250 mm nominal sizesManual or pneumatic actuationContainer-lift and docking aidWash-in-place or removable core
Planning a Split Butterfly Valve specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
