Stainless split butterfly valve with active and passive halves docked

Aliran Laminar dan Peralatan Penahanan

Katup kupu-kupu split

A two-part containment valve whose active and passive halves seal separate vessels, then dock and open as one butterfly disc for powder transfer.

Active and Passive Half Valves
Closed Docking Sequence
Contained Powder Discharge
Manual or Automated Actuation

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The split butterfly valve connects a source container to a receiving vessel without leaving one open valve face exposed. Each half closes its own container. After docking, the two disc halves lock together and act as one butterfly valve; powder transfers through the combined bore, then the valve closes before undocking. The active half contains the drive mechanism, while passive halves can remain on multiple bins or bags. Valve diameter, seals and cleaning method are selected for the powder and process.

Fitur utama:

Independent half valves keep source and receiver closed before docking.

Docking joins the two exposed disc faces before the transfer bore opens.

One active actuator can operate compatible passive units on multiple containers.

Free-orientation or guided docking options accommodate container alignment.

Removable product-contact parts support inspection and cleaning.

Kekhawatiran produk pelanggan

Contained powder transfer depends on the two valve halves aligning, sealing and completing the correct close-before-undock sequence.

Opening a conventional valve exposes the mating face to powder.The split discs join their exposed faces before the combined bore opens.

A suspended IBC is difficult to align precisely.Guided or free-orientation docking tolerates normal positioning variation.

Operators disconnect while the disc remains open.Mechanical interlocks block separation until the combined valve is closed.

Product residue remains on complex valve parts.Quick-release product-contact components allow planned cleaning or changeover.

Aplikasi yang Tipis

IBC dischargeVessel chargingPotent powder transferContained blending and compression feed

Parameter teknis

Typical configurable construction ranges for a pharmaceutical split butterfly valve are listed below.

Bahan inti	SUS316L active and passive valve bodies with engineering-polymer actuator components and silicone or EPDM seals
Ketebalan Panel (Panel Thickness)	20-45 mm valve-body wall and docking-ring sections
Efektif lebar	100-250 mm nominal transfer bore
Panjang maksimum	Up to 450 mm overall docked valve height
Baja menghadap ketebalan	3.0-8.0 mm SUS316L product-contact body sections
Kepadatan inti (core density)	Approximately 8000 kg/m³ for SUS316L product-contact components
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk baja tahan karat austenitic
Permukaan selesai	Electropolished or mechanically polished SUS316L product-contact surfaces
Jenis Bersama	Interlocked active-passive docking ring with split disc, circumferential seals and manual or pneumatic actuator
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

100-250 mm nominal sizesManual or pneumatic actuationContainer-lift and docking aidWash-in-place or removable core

Planning a Split Butterfly Valve specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami