Stainless split butterfly valve with active and passive halves docked

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

분할 버터플로우 밸브 Split Butterfly Valve

A two-part containment valve whose active and passive halves seal separate vessels, then dock and open as one butterfly disc for powder transfer.

Active and Passive Half Valves
Closed Docking Sequence
Contained Powder Discharge
Manual or Automated Actuation

견적 요청 제품 찾아보기

상품 소개

The split butterfly valve connects a source container to a receiving vessel without leaving one open valve face exposed. Each half closes its own container. After docking, the two disc halves lock together and act as one butterfly valve; powder transfers through the combined bore, then the valve closes before undocking. The active half contains the drive mechanism, while passive halves can remain on multiple bins or bags. Valve diameter, seals and cleaning method are selected for the powder and process.

주요 기능

Independent half valves keep source and receiver closed before docking.

Docking joins the two exposed disc faces before the transfer bore opens.

One active actuator can operate compatible passive units on multiple containers.

Free-orientation or guided docking options accommodate container alignment.

Removable product-contact parts support inspection and cleaning.

고객 제품 관심사

Contained powder transfer depends on the two valve halves aligning, sealing and completing the correct close-before-undock sequence.

Opening a conventional valve exposes the mating face to powder.The split discs join their exposed faces before the combined bore opens.

A suspended IBC is difficult to align precisely.Guided or free-orientation docking tolerates normal positioning variation.

Operators disconnect while the disc remains open.Mechanical interlocks block separation until the combined valve is closed.

Product residue remains on complex valve parts.Quick-release product-contact components allow planned cleaning or changeover.

일반적인 응용 프로그램

IBC dischargeVessel chargingPotent powder transferContained blending and compression feed

기술 매개변수

Typical configurable construction ranges for a pharmaceutical split butterfly valve are listed below.

핵심 재료	SUS316L active and passive valve bodies with engineering-polymer actuator components and silicone or EPDM seals
패널 두께	20-45 mm valve-body wall and docking-ring sections
유효 폭	100-250 mm nominal transfer bore
최대 길이	Up to 450 mm overall docked valve height
강철 면면 두께	3.0-8.0 mm SUS316L product-contact body sections
코어 밀도	Approximately 8000 kg/m³ for SUS316L product-contact components
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished or mechanically polished SUS316L product-contact surfaces
접합 유형	Interlocked active-passive docking ring with split disc, circumferential seals and manual or pneumatic actuator
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

100-250 mm nominal sizesManual or pneumatic actuationContainer-lift and docking aidWash-in-place or removable core

Planning a Split Butterfly Valve specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.