English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Раздельный клапан бабочки
A two-part containment valve whose active and passive halves seal separate vessels, then dock and open as one butterfly disc for powder transfer.
- Active and Passive Half Valves
- Closed Docking Sequence
- Contained Powder Discharge
- Manual or Automated Actuation
Введение продукции
The split butterfly valve connects a source container to a receiving vessel without leaving one open valve face exposed. Each half closes its own container. After docking, the two disc halves lock together and act as one butterfly valve; powder transfers through the combined bore, then the valve closes before undocking. The active half contains the drive mechanism, while passive halves can remain on multiple bins or bags. Valve diameter, seals and cleaning method are selected for the powder and process.
Основные характеристики
Docking joins the two exposed disc faces before the transfer bore opens.
One active actuator can operate compatible passive units on multiple containers.
Free-orientation or guided docking options accommodate container alignment.
Removable product-contact parts support inspection and cleaning.
Обеспокоенность клиентов продуктами
Contained powder transfer depends on the two valve halves aligning, sealing and completing the correct close-before-undock sequence.
Opening a conventional valve exposes the mating face to powder.The split discs join their exposed faces before the combined bore opens.
A suspended IBC is difficult to align precisely.Guided or free-orientation docking tolerates normal positioning variation.
Operators disconnect while the disc remains open.Mechanical interlocks block separation until the combined valve is closed.
Product residue remains on complex valve parts.Quick-release product-contact components allow planned cleaning or changeover.
Типичные приложения
IBC dischargeVessel chargingPotent powder transferContained blending and compression feed
Технические параметры
Typical configurable construction ranges for a pharmaceutical split butterfly valve are listed below.
| Основной материал | SUS316L active and passive valve bodies with engineering-polymer actuator components and silicone or EPDM seals |
|---|---|
| Толщина панели | 20-45 mm valve-body wall and docking-ring sections |
| эффективная ширина | 100-250 mm nominal transfer bore |
| Максимальная длина | Up to 450 mm overall docked valve height |
| Толщина линий стали | 3.0-8.0 mm SUS316L product-contact body sections |
| Плотность ядра | Approximately 8000 kg/m³ for SUS316L product-contact components |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Electropolished or mechanically polished SUS316L product-contact surfaces |
| Объединенный тип | Interlocked active-passive docking ring with split disc, circumferential seals and manual or pneumatic actuator |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
100-250 mm nominal sizesManual or pneumatic actuationContainer-lift and docking aidWash-in-place or removable core
Planning a Split Butterfly Valve specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
