English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
Slim غرفة نظيفة مراقبة الوصول قارئ بطاقة
A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.
- Slim Mullion Format
- Contactless RFID Reading
- Blue-Green Status Bar
- Sealed Rear Housing
مقدمة المنتج
The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.
الخصائص الرئيسية
Contactless credential reading avoids exposed slots and moving card mechanisms.
A visible blue-green status light confirms standby, reading and access response states.
The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.
مخاوف المنتج للعملاء
A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.
A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.
Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.
Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.
تطبيقات نموذجية
Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry
المعلمات الفنية
Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.
| المواد الأساسية | Copper RFID antenna and reader electronics on an FR-4 printed circuit board |
|---|---|
| سمك اللوحة | Approximately 18–25 mm reader-body depth |
| العرض الفعال | Approximately 40–48 mm mullion-reader width |
| الحد الأقصى الطول | Approximately 125–145 mm overall reader length |
| الصلب يواجه سمك | 0.8–1.2 mm stainless-steel mounting plate where selected |
| الكثافة الأساسية | Approximately 1850 kg/m³ for the FR-4 electronic laminate |
| الموصلية الحرارية | Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board |
| إنهاء السطح | Matte black UV-stable polymer housing with blue-green status illumination |
| نوع المشترك | Two-point mullion mounting with concealed cable entry gasket and removable terminal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets
Planning a Slim Cleanroom Access Control Card Reader specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
