Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Slim Cleanroom Lecteur de cartes de contrôle d'accès
A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.
- Slim Mullion Format
- Contactless RFID Reading
- Blue-Green Status Bar
- Sealed Rear Housing
Introduction de produit
The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.
Key Features
Contactless credential reading avoids exposed slots and moving card mechanisms.
A visible blue-green status light confirms standby, reading and access response states.
The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.
Préoccupations du client produit
A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.
A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.
Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.
Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.
Les applications typiques
Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry
Paramètres techniques
Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.
| Matériaux de base | Copper RFID antenna and reader electronics on an FR-4 printed circuit board |
|---|---|
| Panneau épaisseur | Approximately 18–25 mm reader-body depth |
| Largeur effective | Approximately 40–48 mm mullion-reader width |
| Longueur maximale | Approximately 125–145 mm overall reader length |
| Acier face épaisseur | 0.8–1.2 mm stainless-steel mounting plate where selected |
| Densité Core | Approximately 1850 kg/m³ for the FR-4 electronic laminate |
| Conductivité thermique | Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board |
| surface finie | Matte black UV-stable polymer housing with blue-green status illumination |
| Type joint | Two-point mullion mounting with concealed cable entry gasket and removable terminal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets
Planning a Slim Cleanroom Access Control Card Reader specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
