Slim cleanroom RFID card reader with blue credential and mounting plate

クリーンルームのドア、窓およびインターロックシステム

スリムクリーンルームアクセス制御カードリーダー

A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.

Slim Mullion Format
Contactless RFID Reading
Blue-Green Status Bar
Sealed Rear Housing

見積もりリクエスト製品案内

商品紹介

The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.

主要な特徴

The narrow body fits mullions where a standard square reader would overlap the door reveal.

Contactless credential reading avoids exposed slots and moving card mechanisms.

A visible blue-green status light confirms standby, reading and access response states.

The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.

お客様の製品に関する懸念事項

A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.

A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.

Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.

Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.

典型的な用途

Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry

技術的なパラメータ

Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.

コア材料	Copper RFID antenna and reader electronics on an FR-4 printed circuit board
パネルの厚さ	Approximately 18–25 mm reader-body depth
有効幅	Approximately 40–48 mm mullion-reader width
最大長さ	Approximately 125–145 mm overall reader length
鋼鉄の厚さを直面する	0.8–1.2 mm stainless-steel mounting plate where selected
コア密度	Approximately 1850 kg/m³ for the FR-4 electronic laminate
熱伝導率	Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board
表面仕上げ	Matte black UV-stable polymer housing with blue-green status illumination
ジョイントタイプ	Two-point mullion mounting with concealed cable entry gasket and removable terminal
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets

Planning a Slim Cleanroom Access Control Card Reader specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する