Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Slim Cleanroom Lector de tarjetas de control de acceso
A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.
- Slim Mullion Format
- Contactless RFID Reading
- Blue-Green Status Bar
- Sealed Rear Housing
Introducción del producto
The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.
Características clave
Contactless credential reading avoids exposed slots and moving card mechanisms.
A visible blue-green status light confirms standby, reading and access response states.
The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.
Preocupaciones del producto del cliente
A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.
A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.
Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.
Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.
Aplicaciones típicas
Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry
Parámetros técnicos
Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.
| Materiales Core | Copper RFID antenna and reader electronics on an FR-4 printed circuit board |
|---|---|
| Panel de espesor | Approximately 18–25 mm reader-body depth |
| Ancho efectivo | Approximately 40–48 mm mullion-reader width |
| Longitud máxima | Approximately 125–145 mm overall reader length |
| Acero frente a espesor | 0.8–1.2 mm stainless-steel mounting plate where selected |
| Densidad Core | Approximately 1850 kg/m³ for the FR-4 electronic laminate |
| Conductividad térmica | Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board |
| Superficie acabada | Matte black UV-stable polymer housing with blue-green status illumination |
| Tipo conjunto | Two-point mullion mounting with concealed cable entry gasket and removable terminal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets
Planning a Slim Cleanroom Access Control Card Reader specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
