Slim cleanroom RFID card reader with blue credential and mounting plate

Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

İnce Temiz Oda Erişim Kontrolü Kart Okuyucu

A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.

Slim Mullion Format
Contactless RFID Reading
Blue-Green Status Bar
Sealed Rear Housing

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.

Ana Özellikler

The narrow body fits mullions where a standard square reader would overlap the door reveal.

Contactless credential reading avoids exposed slots and moving card mechanisms.

A visible blue-green status light confirms standby, reading and access response states.

The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.

Müşteri Ürün Sorunları

A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.

A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.

Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.

Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.

Tipik uygulamalar

Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry

Teknik parametreler

Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.

Temel malzemeler	Copper RFID antenna and reader electronics on an FR-4 printed circuit board
Panel kalınlığı	Approximately 18–25 mm reader-body depth
Effective Width (Etkili Genişlik)	Approximately 40–48 mm mullion-reader width
Maksimum uzunluk	Approximately 125–145 mm overall reader length
Çelik yüz yüze kalınlığı	0.8–1.2 mm stainless-steel mounting plate where selected
Core Density (Çekirdek Yoğunluğu)	Approximately 1850 kg/m³ for the FR-4 electronic laminate
Termal İletkenlik	Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board
Yüzey bitirme	Matte black UV-stable polymer housing with blue-green status illumination
Ortak tip	Two-point mullion mounting with concealed cable entry gasket and removable terminal
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets

Planning a Slim Cleanroom Access Control Card Reader specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun