English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
وحدة التعامل مع الهواء على السطح
A weatherproof outdoor air handler that places filtration and thermal treatment on the roof while preserving indoor production floor space.
- Weatherproof Outdoor Casing
- Roof-Curb Integration
- Serviceable Roof Access
- Configurable Air Treatment
مقدمة المنتج
A rooftop air handling unit packages the air-treatment sequence in a corrosion-protected, insulated enclosure designed for wind, rain, solar exposure and seasonal temperature extremes. Sloped roof panels, sealed service doors, intake hoods and base-frame drainage prevent water entry. Supply and return openings align with a roof curb or external duct risers, and access is arranged from a safe service side. The unit can be supply-only, recirculating or fitted with separated heat recovery according to the clean-facility ventilation strategy.
الخصائص الرئيسية
A continuous structural base transfers unit load and seals to the roof curb or support steel.
UV-stable coating and corrosion-resistant fasteners protect the outdoor casing over long-term exposure.
Intake hoods, drainable coil sections and freeze protection support year-round outdoor operation.
مخاوف المنتج للعملاء
Moving air-handling equipment outdoors saves internal space but exposes every casing joint, door and drain to weather.
Wind-driven rain enters around a flat service door or intake opening.Raised thresholds, compression seals and drained weather hoods protect the air path.
Solar heat and cold ambient conditions increase casing heat gain and condensation risk.Thick thermal-break panels reduce conduction through skins and frame profiles.
An uneven roof curb twists the unit base and opens panel joints.A rigid perimeter base and matched curb distribute load and provide a level sealing surface.
Routine filter or fan service requires unsafe access around the roof edge.All regular service points are grouped on the designated safe side of the unit.
تطبيقات نموذجية
Clean manufacturing buildings with limited plant spacePharmaceutical roof plantsLaboratory ventilation systemsHealthcare clean facilitiesIndustrial outdoor-air treatment
المعلمات الفنية
Typical outdoor casing construction for a rooftop air handling unit is listed below.
| المواد الأساسية | Closed-cell polyurethane or non-combustible mineral-wool insulation in double-skin weather casing |
|---|---|
| سمك اللوحة | 50–75 mm insulated weatherproof panel |
| العرض الفعال | 1200–4000 mm nominal rooftop unit width |
| الحد الأقصى الطول | Up to 14000 mm in weather-sealed shipping sections |
| الصلب يواجه سمك | 0.8–1.2 mm outer skin and 0.6–1.0 mm inner skin |
| الكثافة الأساسية | 40–45 kg/m³ polyurethane or 92–120 kg/m³ mineral wool |
| الموصلية الحرارية | 0.022–0.040 W/(m·K), according to outdoor panel core |
| إنهاء السطح | UV-resistant polyester powder coat over galvanized or Aluzinc steel |
| نوع المشترك | Weather-gasketed thermal-break panels on a continuous bolted roof-base frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Factory roof curb and vibration isolationSupply-only, mixed-air or heat-recovery layoutRain hood, bird screen and motorized dampersCold-climate preheat and freeze protection
Planning a Rooftop Air Handling Unit specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
