English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
ОВК и оборудование для обработки воздуха в чистых помещениях
Установка воздуха на крыше
A weatherproof outdoor air handler that places filtration and thermal treatment on the roof while preserving indoor production floor space.
- Weatherproof Outdoor Casing
- Roof-Curb Integration
- Serviceable Roof Access
- Configurable Air Treatment
Введение продукции
A rooftop air handling unit packages the air-treatment sequence in a corrosion-protected, insulated enclosure designed for wind, rain, solar exposure and seasonal temperature extremes. Sloped roof panels, sealed service doors, intake hoods and base-frame drainage prevent water entry. Supply and return openings align with a roof curb or external duct risers, and access is arranged from a safe service side. The unit can be supply-only, recirculating or fitted with separated heat recovery according to the clean-facility ventilation strategy.
Основные характеристики
A continuous structural base transfers unit load and seals to the roof curb or support steel.
UV-stable coating and corrosion-resistant fasteners protect the outdoor casing over long-term exposure.
Intake hoods, drainable coil sections and freeze protection support year-round outdoor operation.
Обеспокоенность клиентов продуктами
Moving air-handling equipment outdoors saves internal space but exposes every casing joint, door and drain to weather.
Wind-driven rain enters around a flat service door or intake opening.Raised thresholds, compression seals and drained weather hoods protect the air path.
Solar heat and cold ambient conditions increase casing heat gain and condensation risk.Thick thermal-break panels reduce conduction through skins and frame profiles.
An uneven roof curb twists the unit base and opens panel joints.A rigid perimeter base and matched curb distribute load and provide a level sealing surface.
Routine filter or fan service requires unsafe access around the roof edge.All regular service points are grouped on the designated safe side of the unit.
Типичные приложения
Clean manufacturing buildings with limited plant spacePharmaceutical roof plantsLaboratory ventilation systemsHealthcare clean facilitiesIndustrial outdoor-air treatment
Технические параметры
Typical outdoor casing construction for a rooftop air handling unit is listed below.
| Основной материал | Closed-cell polyurethane or non-combustible mineral-wool insulation in double-skin weather casing |
|---|---|
| Толщина панели | 50–75 mm insulated weatherproof panel |
| эффективная ширина | 1200–4000 mm nominal rooftop unit width |
| Максимальная длина | Up to 14000 mm in weather-sealed shipping sections |
| Толщина линий стали | 0.8–1.2 mm outer skin and 0.6–1.0 mm inner skin |
| Плотность ядра | 40–45 kg/m³ polyurethane or 92–120 kg/m³ mineral wool |
| Теплопроводимость | 0.022–0.040 W/(m·K), according to outdoor panel core |
| Поверхностная отделка | UV-resistant polyester powder coat over galvanized or Aluzinc steel |
| Объединенный тип | Weather-gasketed thermal-break panels on a continuous bolted roof-base frame |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Factory roof curb and vibration isolationSupply-only, mixed-air or heat-recovery layoutRain hood, bird screen and motorized dampersCold-climate preheat and freeze protection
Planning a Rooftop Air Handling Unit specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
