English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
قابلة لإعادة الاستخدام غرف نظيفة التلوث السيطرة حصيرة
A washable low-profile polymeric mat with a naturally tacky, non-slip surface that captures floor-level particles from shoes and light wheels at controlled-area entrances.
- Reusable Polymeric Surface
- Foot and Wheel Particle Capture
- Low-Profile Non-Slip Finish
- Optional Static-Control Grade
مقدمة المنتج
The reusable cleanroom contamination-control mat is formed from a dense washable polymer blend with a smooth, high-surface-energy face. As shoes and light cart wheels pass across it, contact transfers loose floor particles to the mat rather than carrying them into the controlled zone. The material can be damp cleaned to restore its working surface instead of peeling away disposable layers. Standard 1.2 or 2.0 metre widths suit entrances and corridors, while semi-permanent edge sealing or a loose-laid format can be selected for the floor construction.
الخصائص الرئيسية
A naturally tacky polymer surface retains loose particulate while remaining washable and reusable.
A static-control grade can be selected where personnel and light trolley movement form part of the ESD plan.
Optional antimicrobial formulation is available for hygiene-sensitive entrances using compatible cleaning agents.
مخاوف المنتج للعملاء
An entrance mat must remain stable underfoot, collect contamination consistently and fit routine cleaning without becoming a recurring disposable waste stream.
Disposable sticky sheets lose performance unpredictably as their exposed layer becomes loaded.The reusable polymer surface is cleaned on a scheduled cycle to restore particle collection.
Peeling adhesive layers creates waste and can generate electrostatic charge beside sensitive processes.A washable mat avoids routine layer removal, with a static-control grade available for ESD-managed entrances.
A loose thick mat shifts or catches small cart casters at the doorway.The 2 mm material can be semi-permanently bonded and edge sealed for a low transition.
A mat sized only for one footfall does not contact the full circumference of cart wheels.Custom lengths create several consecutive contact steps along the controlled entry route.
تطبيقات نموذجية
Cleanroom personnel entrancesGowning room transfer pointsPersonnel airlocksCritical clean corridorsLight cart and equipment wheel crossings
المعلمات الفنية
Typical material and dimensional data for a reusable polymeric cleanroom entrance mat are shown below.
| المواد الأساسية | Dense washable polymer blend with optional antimicrobial or static-control formulation |
|---|---|
| سمك اللوحة | 2.0 ± 0.1 mm nominal mat thickness |
| العرض الفعال | 1200 or 2000 mm standard material width |
| الحد الأقصى الطول | Up to 15000 mm for custom-cut cleanroom walkway formats |
| الصلب يواجه سمك | 0 mm; the mat is a flexible polymeric construction without steel facing |
| الكثافة الأساسية | Approximately 1200–1300 kg/m³ for the dense polymeric mat compound |
| الموصلية الحرارية | Approximately 0.15–0.25 W/(m·K) for the polymeric mat material |
| إنهاء السطح | Optically smooth, naturally tacky and non-slip polymer surface in selected solid colours |
| نوع المشترك | Semi-permanent bonded and edge-sealed installation or removable loose-laid mat with tapered perimeter |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Semi-permanent or removable floating format1200 or 2000 mm standard widthMidnight, slate, green, red, cobalt or titanium colourCustom-cut entry shapes and tapered edge treatment
Planning a Reusable Cleanroom Contamination-Control Mat specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
