English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы полы для чистых комнат
Многоразовый чистый комнат Contamination-Control Mat
A washable low-profile polymeric mat with a naturally tacky, non-slip surface that captures floor-level particles from shoes and light wheels at controlled-area entrances.
- Reusable Polymeric Surface
- Foot and Wheel Particle Capture
- Low-Profile Non-Slip Finish
- Optional Static-Control Grade
Введение продукции
The reusable cleanroom contamination-control mat is formed from a dense washable polymer blend with a smooth, high-surface-energy face. As shoes and light cart wheels pass across it, contact transfers loose floor particles to the mat rather than carrying them into the controlled zone. The material can be damp cleaned to restore its working surface instead of peeling away disposable layers. Standard 1.2 or 2.0 metre widths suit entrances and corridors, while semi-permanent edge sealing or a loose-laid format can be selected for the floor construction.
Основные характеристики
A naturally tacky polymer surface retains loose particulate while remaining washable and reusable.
A static-control grade can be selected where personnel and light trolley movement form part of the ESD plan.
Optional antimicrobial formulation is available for hygiene-sensitive entrances using compatible cleaning agents.
Обеспокоенность клиентов продуктами
An entrance mat must remain stable underfoot, collect contamination consistently and fit routine cleaning without becoming a recurring disposable waste stream.
Disposable sticky sheets lose performance unpredictably as their exposed layer becomes loaded.The reusable polymer surface is cleaned on a scheduled cycle to restore particle collection.
Peeling adhesive layers creates waste and can generate electrostatic charge beside sensitive processes.A washable mat avoids routine layer removal, with a static-control grade available for ESD-managed entrances.
A loose thick mat shifts or catches small cart casters at the doorway.The 2 mm material can be semi-permanently bonded and edge sealed for a low transition.
A mat sized only for one footfall does not contact the full circumference of cart wheels.Custom lengths create several consecutive contact steps along the controlled entry route.
Типичные приложения
Cleanroom personnel entrancesGowning room transfer pointsPersonnel airlocksCritical clean corridorsLight cart and equipment wheel crossings
Технические параметры
Typical material and dimensional data for a reusable polymeric cleanroom entrance mat are shown below.
| Основной материал | Dense washable polymer blend with optional antimicrobial or static-control formulation |
|---|---|
| Толщина панели | 2.0 ± 0.1 mm nominal mat thickness |
| эффективная ширина | 1200 or 2000 mm standard material width |
| Максимальная длина | Up to 15000 mm for custom-cut cleanroom walkway formats |
| Толщина линий стали | 0 mm; the mat is a flexible polymeric construction without steel facing |
| Плотность ядра | Approximately 1200–1300 kg/m³ for the dense polymeric mat compound |
| Теплопроводимость | Approximately 0.15–0.25 W/(m·K) for the polymeric mat material |
| Поверхностная отделка | Optically smooth, naturally tacky and non-slip polymer surface in selected solid colours |
| Объединенный тип | Semi-permanent bonded and edge-sealed installation or removable loose-laid mat with tapered perimeter |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Semi-permanent or removable floating format1200 or 2000 mm standard widthMidnight, slate, green, red, cobalt or titanium colourCustom-cut entry shapes and tapered edge treatment
Planning a Reusable Cleanroom Contamination-Control Mat specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
