Complete reusable cobalt-blue cleanroom anti-slip contamination-control mat

Sistem Lantai Bilik Bersih

Mat Kawalan Pencemaran Bilik Bersih yang boleh diguna semula

A washable low-profile polymeric mat with a naturally tacky, non-slip surface that captures floor-level particles from shoes and light wheels at controlled-area entrances.

Reusable Polymeric Surface
Foot and Wheel Particle Capture
Low-Profile Non-Slip Finish
Optional Static-Control Grade

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The reusable cleanroom contamination-control mat is formed from a dense washable polymer blend with a smooth, high-surface-energy face. As shoes and light cart wheels pass across it, contact transfers loose floor particles to the mat rather than carrying them into the controlled zone. The material can be damp cleaned to restore its working surface instead of peeling away disposable layers. Standard 1.2 or 2.0 metre widths suit entrances and corridors, while semi-permanent edge sealing or a loose-laid format can be selected for the floor construction.

Ciri-ciri Utama

The low 2 mm profile permits routine pedestrian and light-wheel crossing without a thick raised edge.

A naturally tacky polymer surface retains loose particulate while remaining washable and reusable.

A static-control grade can be selected where personnel and light trolley movement form part of the ESD plan.

Optional antimicrobial formulation is available for hygiene-sensitive entrances using compatible cleaning agents.

Kebimbangan Produk Pelanggan

An entrance mat must remain stable underfoot, collect contamination consistently and fit routine cleaning without becoming a recurring disposable waste stream.

Disposable sticky sheets lose performance unpredictably as their exposed layer becomes loaded.The reusable polymer surface is cleaned on a scheduled cycle to restore particle collection.

Peeling adhesive layers creates waste and can generate electrostatic charge beside sensitive processes.A washable mat avoids routine layer removal, with a static-control grade available for ESD-managed entrances.

A loose thick mat shifts or catches small cart casters at the doorway.The 2 mm material can be semi-permanently bonded and edge sealed for a low transition.

A mat sized only for one footfall does not contact the full circumference of cart wheels.Custom lengths create several consecutive contact steps along the controlled entry route.

Permohonan yang biasa

Cleanroom personnel entrancesGowning room transfer pointsPersonnel airlocksCritical clean corridorsLight cart and equipment wheel crossings

Parameter teknikal

Typical material and dimensional data for a reusable polymeric cleanroom entrance mat are shown below.

Bahan Teras	Dense washable polymer blend with optional antimicrobial or static-control formulation
Ketebalan Panel	2.0 ± 0.1 mm nominal mat thickness
Lebar berkesan	1200 or 2000 mm standard material width
Panjang maksimum	Up to 15000 mm for custom-cut cleanroom walkway formats
Keluli Menghadapi Ketebalan	0 mm; the mat is a flexible polymeric construction without steel facing
Ketumpatan teras	Approximately 1200–1300 kg/m³ for the dense polymeric mat compound
Kekonduksian Terma	Approximately 0.15–0.25 W/(m·K) for the polymeric mat material
Kemasan permukaan	Optically smooth, naturally tacky and non-slip polymer surface in selected solid colours
Jenis Bersatu	Semi-permanent bonded and edge-sealed installation or removable loose-laid mat with tapered perimeter
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Semi-permanent or removable floating format1200 or 2000 mm standard widthMidnight, slate, green, red, cobalt or titanium colourCustom-cut entry shapes and tapered edge treatment

Planning a Reusable Cleanroom Contamination-Control Mat specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami