Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Flooring Systemen
Reversible Reinraum Contamination Control Matte
A washable low-profile polymeric mat with a naturally tacky, non-slip surface that captures floor-level particles from shoes and light wheels at controlled-area entrances.
- Reusable Polymeric Surface
- Foot and Wheel Particle Capture
- Low-Profile Non-Slip Finish
- Optional Static-Control Grade
Produkteinführung
The reusable cleanroom contamination-control mat is formed from a dense washable polymer blend with a smooth, high-surface-energy face. As shoes and light cart wheels pass across it, contact transfers loose floor particles to the mat rather than carrying them into the controlled zone. The material can be damp cleaned to restore its working surface instead of peeling away disposable layers. Standard 1.2 or 2.0 metre widths suit entrances and corridors, while semi-permanent edge sealing or a loose-laid format can be selected for the floor construction.
Key Features
A naturally tacky polymer surface retains loose particulate while remaining washable and reusable.
A static-control grade can be selected where personnel and light trolley movement form part of the ESD plan.
Optional antimicrobial formulation is available for hygiene-sensitive entrances using compatible cleaning agents.
Kunden Produktbedenken
An entrance mat must remain stable underfoot, collect contamination consistently and fit routine cleaning without becoming a recurring disposable waste stream.
Disposable sticky sheets lose performance unpredictably as their exposed layer becomes loaded.The reusable polymer surface is cleaned on a scheduled cycle to restore particle collection.
Peeling adhesive layers creates waste and can generate electrostatic charge beside sensitive processes.A washable mat avoids routine layer removal, with a static-control grade available for ESD-managed entrances.
A loose thick mat shifts or catches small cart casters at the doorway.The 2 mm material can be semi-permanently bonded and edge sealed for a low transition.
A mat sized only for one footfall does not contact the full circumference of cart wheels.Custom lengths create several consecutive contact steps along the controlled entry route.
Typische Anwendungen
Cleanroom personnel entrancesGowning room transfer pointsPersonal-AirlocksCritical clean corridorsLight cart and equipment wheel crossings
Technische Parameter
Typical material and dimensional data for a reusable polymeric cleanroom entrance mat are shown below.
| Core Material | Dense washable polymer blend with optional antimicrobial or static-control formulation |
|---|---|
| Panel Dicke | 2.0 ± 0.1 mm nominal mat thickness |
| Effektive Breite | 1200 or 2000 mm standard material width |
| Maximale Länge | Up to 15000 mm for custom-cut cleanroom walkway formats |
| Stahl facing Dicke | 0 mm; the mat is a flexible polymeric construction without steel facing |
| Kerndichte | Approximately 1200–1300 kg/m³ for the dense polymeric mat compound |
| Thermische Leitfähigkeit | Approximately 0.15–0.25 W/(m·K) for the polymeric mat material |
| Oberfläche Finish | Optically smooth, naturally tacky and non-slip polymer surface in selected solid colours |
| Gemeinsamer Typ | Semi-permanent bonded and edge-sealed installation or removable loose-laid mat with tapered perimeter |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Semi-permanent or removable floating format1200 or 2000 mm standard widthMidnight, slate, green, red, cobalt or titanium colourCustom-cut entry shapes and tapered edge treatment
Planning a Reusable Cleanroom Contamination-Control Mat specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
