Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Control de contaminación de sala limpia reutilizable Mat
A washable low-profile polymeric mat with a naturally tacky, non-slip surface that captures floor-level particles from shoes and light wheels at controlled-area entrances.
- Reusable Polymeric Surface
- Foot and Wheel Particle Capture
- Low-Profile Non-Slip Finish
- Optional Static-Control Grade
Introducción del producto
The reusable cleanroom contamination-control mat is formed from a dense washable polymer blend with a smooth, high-surface-energy face. As shoes and light cart wheels pass across it, contact transfers loose floor particles to the mat rather than carrying them into the controlled zone. The material can be damp cleaned to restore its working surface instead of peeling away disposable layers. Standard 1.2 or 2.0 metre widths suit entrances and corridors, while semi-permanent edge sealing or a loose-laid format can be selected for the floor construction.
Características clave
A naturally tacky polymer surface retains loose particulate while remaining washable and reusable.
A static-control grade can be selected where personnel and light trolley movement form part of the ESD plan.
Optional antimicrobial formulation is available for hygiene-sensitive entrances using compatible cleaning agents.
Preocupaciones del producto del cliente
An entrance mat must remain stable underfoot, collect contamination consistently and fit routine cleaning without becoming a recurring disposable waste stream.
Disposable sticky sheets lose performance unpredictably as their exposed layer becomes loaded.The reusable polymer surface is cleaned on a scheduled cycle to restore particle collection.
Peeling adhesive layers creates waste and can generate electrostatic charge beside sensitive processes.A washable mat avoids routine layer removal, with a static-control grade available for ESD-managed entrances.
A loose thick mat shifts or catches small cart casters at the doorway.The 2 mm material can be semi-permanently bonded and edge sealed for a low transition.
A mat sized only for one footfall does not contact the full circumference of cart wheels.Custom lengths create several consecutive contact steps along the controlled entry route.
Aplicaciones típicas
Cleanroom personnel entrancesGowning room transfer pointsAirlocks para personalCritical clean corridorsLight cart and equipment wheel crossings
Parámetros técnicos
Typical material and dimensional data for a reusable polymeric cleanroom entrance mat are shown below.
| Materiales Core | Dense washable polymer blend with optional antimicrobial or static-control formulation |
|---|---|
| Panel de espesor | 2.0 ± 0.1 mm nominal mat thickness |
| Ancho efectivo | 1200 or 2000 mm standard material width |
| Longitud máxima | Up to 15000 mm for custom-cut cleanroom walkway formats |
| Acero frente a espesor | 0 mm; the mat is a flexible polymeric construction without steel facing |
| Densidad Core | Approximately 1200–1300 kg/m³ for the dense polymeric mat compound |
| Conductividad térmica | Approximately 0.15–0.25 W/(m·K) for the polymeric mat material |
| Superficie acabada | Optically smooth, naturally tacky and non-slip polymer surface in selected solid colours |
| Tipo conjunto | Semi-permanent bonded and edge-sealed installation or removable loose-laid mat with tapered perimeter |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Semi-permanent or removable floating format1200 or 2000 mm standard widthMidnight, slate, green, red, cobalt or titanium colourCustom-cut entry shapes and tapered edge treatment
Planning a Reusable Cleanroom Contamination-Control Mat specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
