English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
عداد الجسيمات عن بعد
A compact fixed-point airborne particle sensor for continuous cleanroom monitoring and direct integration with facility monitoring systems.
- Fixed-point sensing reveals continuous particle trends.
- Local buffering protects records through network outages.
- Pump and FMS interfaces fit varied monitoring layouts.
مقدمة المنتج
This remote particle counter is designed for permanent installation at critical monitoring locations where continuous, unattended data is required. A long-life laser sensor measures airborne particles while onboard diagnostics supervise flow, laser condition and communication status. Pumped and central-vacuum configurations allow the sampling architecture to match the facility, and buffered records help preserve measurements if network connectivity is temporarily interrupted.
الخصائص الرئيسية
Continuous second-by-second measurement supports early detection of adverse contamination trends.
Local data buffering protects records during short facility-network interruptions.
Ethernet, serial, analog or wireless options simplify integration with different monitoring platforms.
Pumped and external-vacuum variants support centralized or distributed sampling designs.
Status indicators and predictive diagnostics make maintenance conditions visible before data is compromised.
مخاوف المنتج للعملاء
Critical locations need uninterrupted long-term trends when networks drop, together with interfaces that keep platform integration and sensor maintenance manageable.
A network outage could create gaps in a continuous environmental record.Onboard buffering retains time-sequenced samples for later transfer when communication is restored.
Sampling tubing and external vacuum conditions may alter the required flow.Select integrated-pump or critical-orifice configurations and verify the installed sample path against the intended flow rate.
Cleaning fluid can enter an exposed inlet during room sanitation.A sealed inlet design and detectable protective cap reduce accidental liquid ingress during cleaning.
Facilities use different control and data-acquisition protocols.Configurable Ethernet, serial, analog and wireless outputs provide practical paths into new or existing monitoring systems.
تطبيقات نموذجية
Continuous non-viable monitoring in aseptic filling areasFixed-point monitoring in semiconductor and display manufacturingIntegration with cleanroom facility monitoring systemsParticle trending at isolators and restricted-access barrier systemsMonitoring critical process zones with limited installation space
المعلمات الفنية
The table summarizes representative enclosure materials, sampling or vacuum connections, and communication interfaces for a fixed remote sensor, with the configuration selected to match the monitoring architecture.
| المواد الأساسية | Anodized aluminum or stainless-steel instrument enclosure containing a laser optical sensor and electronic flow-control assembly |
|---|---|
| سمك اللوحة | Typically 1.0–2.0 mm for the formed protective enclosure |
| العرض الفعال | Approximately 115–175 mm according to pump and interface configuration |
| الحد الأقصى الطول | Approximately 200–320 mm including the fixed enclosure but excluding external tubing |
| الصلب يواجه سمك | Approximately 1.0–1.5 mm where a stainless-steel washdown enclosure is specified |
| الكثافة الأساسية | Not applicable; no insulation-panel core is used (0 kg/m³) |
| الموصلية الحرارية | Approximately 14–16 W/(m·K) for stainless steel or 160–205 W/(m·K) for aluminum enclosure sections |
| إنهاء السطح | Smooth anodized or passivated wipe-clean finish with sealed indicator and connector interfaces |
| نوع المشترك | Sealed sampling inlet with Ethernet, serial Modbus, 4–20 mA or wireless communication as configured |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
2.83 or 28.3 L/min flow configuration0.2, 0.3 or 0.5 µm minimum sensitivityIntegrated pump or central-vacuum configurationEthernet, serial Modbus, 4–20 mA or wireless outputVHP-resistant optical and enclosure configurationTemperature and relative-humidity probe input
Planning a Remote Particle Counter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
