English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
وحدة تدفئة المياه الساخنة المعبأة
A factory-arranged hydronic skid that transfers heat into a cleanroom heating loop and circulates it through air-handler coils at controlled temperature.
- Complete Hydronic Skid
- Plate-Exchanger Circuit Separation
- Integrated Pump and Expansion
- Visible Operating Instruments
مقدمة المنتج
The unit groups a gasketed plate heat exchanger, in-line circulation pump, expansion vessel, control valves, gauges, manifolds and electrical cabinet on one rigid skid. Primary hot water or steam heats a separate secondary loop without mixing the fluids. The integrated pump maintains coil circulation while the control valve modulates heat input to a defined supply-water temperature.
الخصائص الرئيسية
Plate channels physically separate the primary heat source from the cleanroom heating-water circuit.
A dedicated in-line pump maintains stable secondary flow as the primary control valve modulates.
Pressure, temperature and flow instruments are visible from the service side for rapid operating checks.
مخاوف المنتج للعملاء
A secondary heating loop needs hydraulic separation, stable temperature and maintainable components within limited plant space.
Primary plant water chemistry is unsuitable for sensitive secondary equipment.A gasketed plate exchanger keeps the primary and cleanroom heating loops physically separate.
Field-installed components occupy excessive space and have inconsistent access.The complete pump, exchanger, vessel and valve arrangement is organized on one serviceable skid.
Changing primary temperature causes unstable coil supply water.A modulating valve regulates heat input while the secondary pump maintains constant circulation.
Expansion pressure and trapped air interrupt hydronic flow.An integrated expansion vessel, air vent and fill connection stabilize the closed secondary circuit.
تطبيقات نموذجية
Cleanroom AHU heating loopsPharmaceutical secondary hot-water circuitsHospital laboratory ventilationHeat-recovery interface stationsBoiler-to-low-temperature hydronic conversion
المعلمات الفنية
Typical physical construction data for a packaged secondary heating-water unit are shown below.
| المواد الأساسية | Carbon-steel skid with AISI 304 or 316 stainless plate exchanger, cast-iron pump and stainless manifolds |
|---|---|
| سمك اللوحة | 8-16 mm fabricated steel skid and mounting plate thickness |
| العرض الفعال | 800-1800 mm typical skid width |
| الحد الأقصى الطول | Up to 3600 mm overall skid length |
| الصلب يواجه سمك | 1.2-2.0 mm electrical cabinet sheet |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for the austenitic stainless steel heat-exchanger plate pack |
| الموصلية الحرارية | Approximately 14-16 W/(m·K) for the austenitic stainless steel exchanger plates |
| إنهاء السطح | Epoxy-coated black base with painted components and stainless manifolds |
| نوع المشترك | Welded skid and manifolds with flanged pump, exchanger and valve connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Steam-to-water or water-to-water heat sourceSingle or duty-standby secondary pumpsTwo-way or three-way primary control valveInsulated piping, flow meter and remote communications
Planning a Packaged Hot-Water Heating Unit specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
