Packaged hot-water heating skid with plate exchanger and red pump

클린룸 HVAC 및 공기 처리 장비

패키지형 온수 난방장치

A factory-arranged hydronic skid that transfers heat into a cleanroom heating loop and circulates it through air-handler coils at controlled temperature.

Complete Hydronic Skid
Plate-Exchanger Circuit Separation
Integrated Pump and Expansion
Visible Operating Instruments

견적 요청 제품 찾아보기

상품 소개

The unit groups a gasketed plate heat exchanger, in-line circulation pump, expansion vessel, control valves, gauges, manifolds and electrical cabinet on one rigid skid. Primary hot water or steam heats a separate secondary loop without mixing the fluids. The integrated pump maintains coil circulation while the control valve modulates heat input to a defined supply-water temperature.

주요 기능

One packaged base reduces separate field mounting of heat exchanger, pump, vessel, valves and instruments.

Plate channels physically separate the primary heat source from the cleanroom heating-water circuit.

A dedicated in-line pump maintains stable secondary flow as the primary control valve modulates.

Pressure, temperature and flow instruments are visible from the service side for rapid operating checks.

고객 제품 관심사

A secondary heating loop needs hydraulic separation, stable temperature and maintainable components within limited plant space.

Primary plant water chemistry is unsuitable for sensitive secondary equipment.A gasketed plate exchanger keeps the primary and cleanroom heating loops physically separate.

Field-installed components occupy excessive space and have inconsistent access.The complete pump, exchanger, vessel and valve arrangement is organized on one serviceable skid.

Changing primary temperature causes unstable coil supply water.A modulating valve regulates heat input while the secondary pump maintains constant circulation.

Expansion pressure and trapped air interrupt hydronic flow.An integrated expansion vessel, air vent and fill connection stabilize the closed secondary circuit.

일반적인 응용 프로그램

Cleanroom AHU heating loopsPharmaceutical secondary hot-water circuitsHospital laboratory ventilationHeat-recovery interface stationsBoiler-to-low-temperature hydronic conversion

기술 매개변수

Typical physical construction data for a packaged secondary heating-water unit are shown below.

핵심 재료	Carbon-steel skid with AISI 304 or 316 stainless plate exchanger, cast-iron pump and stainless manifolds
패널 두께	8-16 mm fabricated steel skid and mounting plate thickness
유효 폭	800-1800 mm typical skid width
최대 길이	Up to 3600 mm overall skid length
강철 면면 두께	1.2-2.0 mm electrical cabinet sheet
코어 밀도	Approximately 7900-8000 kg/m³ for the austenitic stainless steel heat-exchanger plate pack
열전도도 (Thermal Conductivity)	Approximately 14-16 W/(m·K) for the austenitic stainless steel exchanger plates
표면 마무리	Epoxy-coated black base with painted components and stainless manifolds
접합 유형	Welded skid and manifolds with flanged pump, exchanger and valve connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Steam-to-water or water-to-water heat sourceSingle or duty-standby secondary pumpsTwo-way or three-way primary control valveInsulated piping, flow meter and remote communications

Planning a Packaged Hot-Water Heating Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.