Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad de calefacción de agua caliente empaquetada
A factory-arranged hydronic skid that transfers heat into a cleanroom heating loop and circulates it through air-handler coils at controlled temperature.
- Complete Hydronic Skid
- Plate-Exchanger Circuit Separation
- Integrated Pump and Expansion
- Visible Operating Instruments
Introducción del producto
The unit groups a gasketed plate heat exchanger, in-line circulation pump, expansion vessel, control valves, gauges, manifolds and electrical cabinet on one rigid skid. Primary hot water or steam heats a separate secondary loop without mixing the fluids. The integrated pump maintains coil circulation while the control valve modulates heat input to a defined supply-water temperature.
Características clave
Plate channels physically separate the primary heat source from the cleanroom heating-water circuit.
A dedicated in-line pump maintains stable secondary flow as the primary control valve modulates.
Pressure, temperature and flow instruments are visible from the service side for rapid operating checks.
Preocupaciones del producto del cliente
A secondary heating loop needs hydraulic separation, stable temperature and maintainable components within limited plant space.
Primary plant water chemistry is unsuitable for sensitive secondary equipment.A gasketed plate exchanger keeps the primary and cleanroom heating loops physically separate.
Field-installed components occupy excessive space and have inconsistent access.The complete pump, exchanger, vessel and valve arrangement is organized on one serviceable skid.
Changing primary temperature causes unstable coil supply water.A modulating valve regulates heat input while the secondary pump maintains constant circulation.
Expansion pressure and trapped air interrupt hydronic flow.An integrated expansion vessel, air vent and fill connection stabilize the closed secondary circuit.
Aplicaciones típicas
Cleanroom AHU heating loopsPharmaceutical secondary hot-water circuitsHospital laboratory ventilationHeat-recovery interface stationsBoiler-to-low-temperature hydronic conversion
Parámetros técnicos
Typical physical construction data for a packaged secondary heating-water unit are shown below.
| Materiales Core | Carbon-steel skid with AISI 304 or 316 stainless plate exchanger, cast-iron pump and stainless manifolds |
|---|---|
| Panel de espesor | 8-16 mm fabricated steel skid and mounting plate thickness |
| Ancho efectivo | 800-1800 mm typical skid width |
| Longitud máxima | Up to 3600 mm overall skid length |
| Acero frente a espesor | 1.2-2.0 mm electrical cabinet sheet |
| Densidad Core | Approximately 7900-8000 kg/m³ for the austenitic stainless steel heat-exchanger plate pack |
| Conductividad térmica | Approximately 14-16 W/(m·K) for the austenitic stainless steel exchanger plates |
| Superficie acabada | Epoxy-coated black base with painted components and stainless manifolds |
| Tipo conjunto | Welded skid and manifolds with flanged pump, exchanger and valve connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Steam-to-water or water-to-water heat sourceSingle or duty-standby secondary pumpsTwo-way or three-way primary control valveInsulated piping, flow meter and remote communications
Planning a Packaged Hot-Water Heating Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
