Packaged hot-water heating skid with plate exchanger and red pump

Temiz Oda HVAC ve Hava İşleme Ekipmanları

Paketlenmiş Sıcak Su Isıtma Birimi

A factory-arranged hydronic skid that transfers heat into a cleanroom heating loop and circulates it through air-handler coils at controlled temperature.

Complete Hydronic Skid
Plate-Exchanger Circuit Separation
Integrated Pump and Expansion
Visible Operating Instruments

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The unit groups a gasketed plate heat exchanger, in-line circulation pump, expansion vessel, control valves, gauges, manifolds and electrical cabinet on one rigid skid. Primary hot water or steam heats a separate secondary loop without mixing the fluids. The integrated pump maintains coil circulation while the control valve modulates heat input to a defined supply-water temperature.

Ana Özellikler

One packaged base reduces separate field mounting of heat exchanger, pump, vessel, valves and instruments.

Plate channels physically separate the primary heat source from the cleanroom heating-water circuit.

A dedicated in-line pump maintains stable secondary flow as the primary control valve modulates.

Pressure, temperature and flow instruments are visible from the service side for rapid operating checks.

Müşteri Ürün Sorunları

A secondary heating loop needs hydraulic separation, stable temperature and maintainable components within limited plant space.

Primary plant water chemistry is unsuitable for sensitive secondary equipment.A gasketed plate exchanger keeps the primary and cleanroom heating loops physically separate.

Field-installed components occupy excessive space and have inconsistent access.The complete pump, exchanger, vessel and valve arrangement is organized on one serviceable skid.

Changing primary temperature causes unstable coil supply water.A modulating valve regulates heat input while the secondary pump maintains constant circulation.

Expansion pressure and trapped air interrupt hydronic flow.An integrated expansion vessel, air vent and fill connection stabilize the closed secondary circuit.

Tipik uygulamalar

Cleanroom AHU heating loopsPharmaceutical secondary hot-water circuitsHospital laboratory ventilationHeat-recovery interface stationsBoiler-to-low-temperature hydronic conversion

Teknik parametreler

Typical physical construction data for a packaged secondary heating-water unit are shown below.

Temel malzemeler	Carbon-steel skid with AISI 304 or 316 stainless plate exchanger, cast-iron pump and stainless manifolds
Panel kalınlığı	8-16 mm fabricated steel skid and mounting plate thickness
Effective Width (Etkili Genişlik)	800-1800 mm typical skid width
Maksimum uzunluk	Up to 3600 mm overall skid length
Çelik yüz yüze kalınlığı	1.2-2.0 mm electrical cabinet sheet
Core Density (Çekirdek Yoğunluğu)	Approximately 7900-8000 kg/m³ for the austenitic stainless steel heat-exchanger plate pack
Termal İletkenlik	Approximately 14-16 W/(m·K) for the austenitic stainless steel exchanger plates
Yüzey bitirme	Epoxy-coated black base with painted components and stainless manifolds
Ortak tip	Welded skid and manifolds with flanged pump, exchanger and valve connections
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Steam-to-water or water-to-water heat sourceSingle or duty-standby secondary pumpsTwo-way or three-way primary control valveInsulated piping, flow meter and remote communications

Planning a Packaged Hot-Water Heating Unit specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun