Packaged hot-water heating skid with plate exchanger and red pump

クリーンルーム HVAC および空気処理装置

Packed 温水暖房ユニット

A factory-arranged hydronic skid that transfers heat into a cleanroom heating loop and circulates it through air-handler coils at controlled temperature.

Complete Hydronic Skid
Plate-Exchanger Circuit Separation
Integrated Pump and Expansion
Visible Operating Instruments

見積もりリクエスト製品案内

商品紹介

The unit groups a gasketed plate heat exchanger, in-line circulation pump, expansion vessel, control valves, gauges, manifolds and electrical cabinet on one rigid skid. Primary hot water or steam heats a separate secondary loop without mixing the fluids. The integrated pump maintains coil circulation while the control valve modulates heat input to a defined supply-water temperature.

主要な特徴

One packaged base reduces separate field mounting of heat exchanger, pump, vessel, valves and instruments.

Plate channels physically separate the primary heat source from the cleanroom heating-water circuit.

A dedicated in-line pump maintains stable secondary flow as the primary control valve modulates.

Pressure, temperature and flow instruments are visible from the service side for rapid operating checks.

お客様の製品に関する懸念事項

A secondary heating loop needs hydraulic separation, stable temperature and maintainable components within limited plant space.

Primary plant water chemistry is unsuitable for sensitive secondary equipment.A gasketed plate exchanger keeps the primary and cleanroom heating loops physically separate.

Field-installed components occupy excessive space and have inconsistent access.The complete pump, exchanger, vessel and valve arrangement is organized on one serviceable skid.

Changing primary temperature causes unstable coil supply water.A modulating valve regulates heat input while the secondary pump maintains constant circulation.

Expansion pressure and trapped air interrupt hydronic flow.An integrated expansion vessel, air vent and fill connection stabilize the closed secondary circuit.

典型的な用途

Cleanroom AHU heating loopsPharmaceutical secondary hot-water circuitsHospital laboratory ventilationHeat-recovery interface stationsBoiler-to-low-temperature hydronic conversion

技術的なパラメータ

Typical physical construction data for a packaged secondary heating-water unit are shown below.

コア材料	Carbon-steel skid with AISI 304 or 316 stainless plate exchanger, cast-iron pump and stainless manifolds
パネルの厚さ	8-16 mm fabricated steel skid and mounting plate thickness
有効幅	800-1800 mm typical skid width
最大長さ	Up to 3600 mm overall skid length
鋼鉄の厚さを直面する	1.2-2.0 mm electrical cabinet sheet
コア密度	Approximately 7900-8000 kg/m³ for the austenitic stainless steel heat-exchanger plate pack
熱伝導率	Approximately 14-16 W/(m·K) for the austenitic stainless steel exchanger plates
表面仕上げ	Epoxy-coated black base with painted components and stainless manifolds
ジョイントタイプ	Welded skid and manifolds with flanged pump, exchanger and valve connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Steam-to-water or water-to-water heat sourceSingle or duty-standby secondary pumpsTwo-way or three-way primary control valveInsulated piping, flow meter and remote communications

Planning a Packaged Hot-Water Heating Unit specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する