English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
ميكرومانومتر
A high-resolution dual-port micromanometer for cleanroom pressure-cascade checks, filter pressure-drop testing and Pitot-tube duct traverses.
- High-resolution low-pressure measurement.
- Dual ports for cleanroom cascade verification.
- Pitot velocity and volume-flow calculation.
مقدمة المنتج
This portable micromanometer resolves small static and differential air pressures through two color-coded pressure ports. Automatic zeroing, selectable engineering units and damping help stabilize readings at airlocks and controlled rooms. With a Pitot tube and entered duct geometry, the same instrument can calculate velocity and air volume during ventilation commissioning.
الخصائص الرئيسية
Dual ports support positive, negative and differential measurements.
Selectable damping steadies readings affected by door movement or turbulence.
Pitot input converts velocity pressure into duct air speed and flow.
Min, max and average capture supports systematic test-point review.
Rugged handheld enclosure suits qualification and maintenance routes.
مخاوف المنتج للعملاء
Controlled environments depend on small pressure differences that must be measured without confusing transient fluctuations, tubing polarity or instrument drift.
Small room-pressure differentials can be obscured by sensor noise.A high-resolution low-pressure sensor with damping produces a stable displayed value.
Reversed tubing can make pressure direction difficult to interpret.Color-coded positive and negative ports make the connection polarity immediately visible.
Door movement creates short transients during cascade checks.Averaging and min/max capture distinguish the settled relationship from brief disturbances.
Duct velocity calculations add time and opportunities for arithmetic errors.Pitot mode and entered duct dimensions provide direct velocity and volume-flow results.
تطبيقات نموذجية
Cleanroom pressure-cascade verificationAirlock and isolation-room testingHEPA filter pressure-drop measurementPitot-tube duct traversesHVAC commissioning and balancing
المعلمات الفنية
Typical portable micromanometer construction is summarized below; pressure range, damping, logging and probe accessories can be matched to the qualification method.
| المواد الأساسية | Piezoresistive pressure sensor, brass pressure ports and impact-resistant polymer enclosure |
|---|---|
| سمك اللوحة | Typically 2.0-3.5 mm for the molded instrument housing |
| العرض الفعال | Approximately 75-100 mm across the handheld meter body |
| الحد الأقصى الطول | Approximately 180-230 mm for the handheld instrument body |
| الصلب يواجه سمك | Typically 0.5-1.0 mm for optional stainless Pitot and static-pressure probes |
| الكثافة الأساسية | Approximately 1050-1200 kg/m³ for the engineered polymer enclosure |
| الموصلية الحرارية | Approximately 0.18-0.25 W/(m·K) for the engineered polymer enclosure |
| إنهاء السطح | Dark graphite overmolded housing with blue and red pressure-port identifiers |
| نوع المشترك | Barbed dual pressure ports for flexible tubing with keyed accessory interfaces |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Low- or extended-pressure rangePitot tube setStatic-pressure probesFlexible tubing kitData-logging configurationProtective carrying case
Planning a Micromanometer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
