Micromanometer in three-quarter view with dual pressure ports

Instrumen pengujian dan validasi ruang bersih

Mikromanometer (Mikromanometer)

A high-resolution dual-port micromanometer for cleanroom pressure-cascade checks, filter pressure-drop testing and Pitot-tube duct traverses.

High-resolution low-pressure measurement.
Dual ports for cleanroom cascade verification.
Pitot velocity and volume-flow calculation.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This portable micromanometer resolves small static and differential air pressures through two color-coded pressure ports. Automatic zeroing, selectable engineering units and damping help stabilize readings at airlocks and controlled rooms. With a Pitot tube and entered duct geometry, the same instrument can calculate velocity and air volume during ventilation commissioning.

Fitur utama:

Sensitive differential-pressure sensor resolves small room-pressure changes.

Dual ports support positive, negative and differential measurements.

Selectable damping steadies readings affected by door movement or turbulence.

Pitot input converts velocity pressure into duct air speed and flow.

Min, max and average capture supports systematic test-point review.

Rugged handheld enclosure suits qualification and maintenance routes.

Kekhawatiran produk pelanggan

Controlled environments depend on small pressure differences that must be measured without confusing transient fluctuations, tubing polarity or instrument drift.

Small room-pressure differentials can be obscured by sensor noise.A high-resolution low-pressure sensor with damping produces a stable displayed value.

Reversed tubing can make pressure direction difficult to interpret.Color-coded positive and negative ports make the connection polarity immediately visible.

Door movement creates short transients during cascade checks.Averaging and min/max capture distinguish the settled relationship from brief disturbances.

Duct velocity calculations add time and opportunities for arithmetic errors.Pitot mode and entered duct dimensions provide direct velocity and volume-flow results.

Aplikasi yang Tipis

Cleanroom pressure-cascade verificationAirlock and isolation-room testingHEPA filter pressure-drop measurementPitot-tube duct traversesHVAC commissioning and balancing

Parameter teknis

Typical portable micromanometer construction is summarized below; pressure range, damping, logging and probe accessories can be matched to the qualification method.

Bahan inti	Piezoresistive pressure sensor, brass pressure ports and impact-resistant polymer enclosure
Ketebalan Panel (Panel Thickness)	Typically 2.0-3.5 mm for the molded instrument housing
Efektif lebar	Approximately 75-100 mm across the handheld meter body
Panjang maksimum	Approximately 180-230 mm for the handheld instrument body
Baja menghadap ketebalan	Typically 0.5-1.0 mm for optional stainless Pitot and static-pressure probes
Kepadatan inti (core density)	Approximately 1050-1200 kg/m³ for the engineered polymer enclosure
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.18-0.25 W/(m·K) for the engineered polymer enclosure
Permukaan selesai	Dark graphite overmolded housing with blue and red pressure-port identifiers
Jenis Bersama	Barbed dual pressure ports for flexible tubing with keyed accessory interfaces
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Low- or extended-pressure rangePitot tube setStatic-pressure probesFlexible tubing kitData-logging configurationProtective carrying case

Planning a Micromanometer specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami