İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Test ve Validasyon Aletleri
Mikromanometre
A high-resolution dual-port micromanometer for cleanroom pressure-cascade checks, filter pressure-drop testing and Pitot-tube duct traverses.
- High-resolution low-pressure measurement.
- Dual ports for cleanroom cascade verification.
- Pitot velocity and volume-flow calculation.
Ürün tanıtımı
This portable micromanometer resolves small static and differential air pressures through two color-coded pressure ports. Automatic zeroing, selectable engineering units and damping help stabilize readings at airlocks and controlled rooms. With a Pitot tube and entered duct geometry, the same instrument can calculate velocity and air volume during ventilation commissioning.
Ana Özellikler
Dual ports support positive, negative and differential measurements.
Selectable damping steadies readings affected by door movement or turbulence.
Pitot input converts velocity pressure into duct air speed and flow.
Min, max and average capture supports systematic test-point review.
Rugged handheld enclosure suits qualification and maintenance routes.
Müşteri Ürün Sorunları
Controlled environments depend on small pressure differences that must be measured without confusing transient fluctuations, tubing polarity or instrument drift.
Small room-pressure differentials can be obscured by sensor noise.A high-resolution low-pressure sensor with damping produces a stable displayed value.
Reversed tubing can make pressure direction difficult to interpret.Color-coded positive and negative ports make the connection polarity immediately visible.
Door movement creates short transients during cascade checks.Averaging and min/max capture distinguish the settled relationship from brief disturbances.
Duct velocity calculations add time and opportunities for arithmetic errors.Pitot mode and entered duct dimensions provide direct velocity and volume-flow results.
Tipik uygulamalar
Cleanroom pressure-cascade verificationAirlock and isolation-room testingHEPA filter pressure-drop measurementPitot-tube duct traversesHVAC commissioning and balancing
Teknik parametreler
Typical portable micromanometer construction is summarized below; pressure range, damping, logging and probe accessories can be matched to the qualification method.
| Temel malzemeler | Piezoresistive pressure sensor, brass pressure ports and impact-resistant polymer enclosure |
|---|---|
| Panel kalınlığı | Typically 2.0-3.5 mm for the molded instrument housing |
| Effective Width (Etkili Genişlik) | Approximately 75-100 mm across the handheld meter body |
| Maksimum uzunluk | Approximately 180-230 mm for the handheld instrument body |
| Çelik yüz yüze kalınlığı | Typically 0.5-1.0 mm for optional stainless Pitot and static-pressure probes |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1050-1200 kg/m³ for the engineered polymer enclosure |
| Termal İletkenlik | Approximately 0.18-0.25 W/(m·K) for the engineered polymer enclosure |
| Yüzey bitirme | Dark graphite overmolded housing with blue and red pressure-port identifiers |
| Ortak tip | Barbed dual pressure ports for flexible tubing with keyed accessory interfaces |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Low- or extended-pressure rangePitot tube setStatic-pressure probesFlexible tubing kitData-logging configurationProtective carrying case
Planning a Micromanometer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
