Micromanometer in three-quarter view with dual pressure ports

Приборы для испытаний и валидации в чистых помещениях

Микроманометр

A high-resolution dual-port micromanometer for cleanroom pressure-cascade checks, filter pressure-drop testing and Pitot-tube duct traverses.

High-resolution low-pressure measurement.
Dual ports for cleanroom cascade verification.
Pitot velocity and volume-flow calculation.

Запрос котировки Просмотреть продукты

Введение продукции

This portable micromanometer resolves small static and differential air pressures through two color-coded pressure ports. Automatic zeroing, selectable engineering units and damping help stabilize readings at airlocks and controlled rooms. With a Pitot tube and entered duct geometry, the same instrument can calculate velocity and air volume during ventilation commissioning.

Основные характеристики

Sensitive differential-pressure sensor resolves small room-pressure changes.

Dual ports support positive, negative and differential measurements.

Selectable damping steadies readings affected by door movement or turbulence.

Pitot input converts velocity pressure into duct air speed and flow.

Min, max and average capture supports systematic test-point review.

Rugged handheld enclosure suits qualification and maintenance routes.

Обеспокоенность клиентов продуктами

Controlled environments depend on small pressure differences that must be measured without confusing transient fluctuations, tubing polarity or instrument drift.

Small room-pressure differentials can be obscured by sensor noise.A high-resolution low-pressure sensor with damping produces a stable displayed value.

Reversed tubing can make pressure direction difficult to interpret.Color-coded positive and negative ports make the connection polarity immediately visible.

Door movement creates short transients during cascade checks.Averaging and min/max capture distinguish the settled relationship from brief disturbances.

Duct velocity calculations add time and opportunities for arithmetic errors.Pitot mode and entered duct dimensions provide direct velocity and volume-flow results.

Типичные приложения

Cleanroom pressure-cascade verificationAirlock and isolation-room testingHEPA filter pressure-drop measurementPitot-tube duct traversesHVAC commissioning and balancing

Технические параметры

Typical portable micromanometer construction is summarized below; pressure range, damping, logging and probe accessories can be matched to the qualification method.

Основной материал	Piezoresistive pressure sensor, brass pressure ports and impact-resistant polymer enclosure
Толщина панели	Typically 2.0-3.5 mm for the molded instrument housing
эффективная ширина	Approximately 75-100 mm across the handheld meter body
Максимальная длина	Approximately 180-230 mm for the handheld instrument body
Толщина линий стали	Typically 0.5-1.0 mm for optional stainless Pitot and static-pressure probes
Плотность ядра	Approximately 1050-1200 kg/m³ for the engineered polymer enclosure
Теплопроводимость	Approximately 0.18-0.25 W/(m·K) for the engineered polymer enclosure
Поверхностная отделка	Dark graphite overmolded housing with blue and red pressure-port identifiers
Объединенный тип	Barbed dual pressure ports for flexible tubing with keyed accessory interfaces
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Low- or extended-pressure rangePitot tube setStatic-pressure probesFlexible tubing kitData-logging configurationProtective carrying case

Planning a Micromanometer specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой