English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
غرفة نقل المواد الغرف النظيفة الكبيرة
An oversized interlocked chamber for moving carts, equipment and large packaged materials between controlled rooms.
- Oversized Transfer Volume
- Wide Equipment Doors
- Reinforced Cargo Floor
- Configurable Airlock Sequence
مقدمة المنتج
The large material transfer chamber provides a purpose-designed intermediate volume when the load exceeds a conventional pass box. Stainless internal panels and coved corners support cleaning, while the structural frame and cargo floor are selected for the actual trolley or equipment load. Door configuration, viewing panels, purge connection and floor interface can be adapted to the route through the facility.
الخصائص الرئيسية
A reinforced cargo floor supports the specified wheel or point load.
Interlocked doors maintain room separation during a large transfer.
Coved internal corners simplify cleaning around large packaging.
Service panels allow optional purge or pressure-control connections.
مخاوف المنتج للعملاء
Oversized loads need enough clearance and floor capacity while preserving the controlled boundary between rooms.
A standard pass box is too small for a trolley or equipment skid.The chamber size and door clear opening are configured around the transfer envelope.
Concentrated wheel loads deform a light cabinet floor.The cargo deck is reinforced for the specified load and wheel pattern.
Large doors are difficult to operate in a narrow corridor.Door type and opening direction can be matched to available handling space.
Large packaging sheds debris at the room boundary.Smooth interior liners, wipe-down access and optional purge support controlled preparation.
تطبيقات نموذجية
Equipment entry to clean manufacturingLarge sterile component transferMedical-device cart movementPilot plant material logistics
المعلمات الفنية
Typical construction ranges for a large cleanroom material transfer chamber are listed below.
| المواد الأساسية | Reinforced SUS 304 or SUS 316L chamber with structural frame, cargo floor and interlocked access doors |
|---|---|
| سمك اللوحة | 80-150 mm reinforced insulated wall and ceiling panels |
| العرض الفعال | 1200-2500 mm clear chamber width |
| الحد الأقصى الطول | Up to 3500 mm transfer-chamber depth |
| الصلب يواجه سمك | 1.2-2.0 mm stainless-steel internal facing |
| الكثافة الأساسية | 40-45 kg/m³ closed-cell PIR insulation |
| الموصلية الحرارية | 0.021-0.026 W/(m·K) for the insulated chamber envelope |
| إنهاء السطح | Brushed or electropolished stainless interior with coved corners and reinforced floor plate |
| نوع المشترك | Sealed framed enclosure with large compression-gasketed interlocked doors and load-rated floor joints |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Roller or flush cargo floorSwing, slide or lift doorsViewing windows and status lightsFiltered purge connection
Planning a Large Cleanroom Material Transfer Chamber specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
